|
|
|
|
|
|
|
|
|
FOR OUR FULL LINE-UP OF
CASE HARDWARE PARTS AND FITTINGS - CLICK HERE!
| CASE HARDWARE CLOSE-OUT PARTS (limited supplies available) | |||
|
4HARCAT2 |
This is a hasp-equipped twist catch assembly made up of spring-loaded butterfly rotating catch assembly and separate strike plate that is equipped with a steel "D" ring that is overlaid by a slotted steel arm permitting use of a padlock of 1/4" or less. Each member fastens to case or crate surface separately with 4 fasteners of choice. Dimensions are: 4-3/8" x 3-1/4". Both members of this catch assembly are zinc plated for corrosion resistance. |
 |
$1.19 Wt. Each - < 1 lb.  |
| 4HARCATRECPLAS |
This is a standard twist catch assembly made up of spring-loaded butterfly rotating catch assembly and separate strike plate, both of which are rivet-fastened to a tough plastic recessed plate. Each member fastens to case or crate surface separately with 4 fasteners of choice. Plate dimensions are (small "strike" half) - 2-1/4" high x 5-1/2" wide (large "latch" half)- 3-3/4" high x 5-1/2" wide Cut-out size - 3-1/2" x 4". Both steel members of this catch assembly are flat black powder coated and recessed plastic dish (1-1/8" high) is flat black in color. |
 |
$.99 Wt. Each - < 1 lb. |
| 4HARCOR17052V |
Large hard plastic ball corner, 3" x 3" x 3", with 6 fastener attachment. Color is flat black. |
 |
$.14 Wt. Each- < 1 lb. |
| 4HARCOR382P |
Small hard plastic square fitting corner, 2" x 2" x 2", with 6 fastener attachment and stacking feature. |
 |
$.09 Wt. Each- < 1 lb. |
| 4HARCOR1404P | Small hard plastic square fitting corner, 1-5/8" x 1-5/8" x 1-5/8", with 3 fastener attachment and stacking feature. |
 |
$.09 Wt. Each- < 1 lb. |
| 4HARBUCISP | Hard plastic buckle, 1-7/8" x 1-3/4", intended for straps that are 1-3/8" wide. |
 |
$.25 Wt. Each- < 1 lb. |
| 4HARHANPULL4STG | Case Cart Handle, 4-stage retractable, telescoping tow handle. Length when fully extended is 36-1/4" (24" extending outside of case). 12" minimum case interior length required for installation. Recessed mounting dish is zinc plated steel. Retracting handle assembly locks in both the fully compressed and in full extended positions. |
 |
$9.95 Wt. Each - 2.0 lbs. |
| 5CSTCASTER | 5" diameter hard rubber tread on steel caster wheel. Both vertical and horizontal rotation have grease fitting equipped ball bearing races. Overall height elevation with this caster is 6". |
 |
$4.99 Wt. Each - 3.0 lbs. |
* All Close-out Parts sales are FINAL! Please be sure that these items will work for the application you have in mind. All Closeout Parts are Non-Returnable.
Star Case Manufacturing
Co., Inc.
648 Superior Ave.
Munster, IN 46321
(219)922-4440 FAX: (219)922-4442
(800)822-STAR
(800)782-CASE
e-mail: star@starcase.com
Copyright :
1995-2008 - Star Case Manufacturing Co., Inc.
Prices, descriptions and
specifications are subject to change without notice.
The data contained in this document is the property of Star Case Manufacturing Co., Inc. and is not to be reproduced or distributed without authorization from Star Case Manufacturing Co., Inc. www.starcase.com
