|
|
|
|
EIA Rack Rail Types
| DUAL TAPPED RACK RAIL Both legs tapped (10-32) Required rail for use with Knock-down Racks |
UNIVERSAL RACK RAIL One leg tapped (10-32), one leg untapped (9/32") Can be used for nearly any rack case, cabinet or built-in requirement |
 |
 |
| Click Here to Purchase Dual Tapped Rack Rail | Click Here to Purchase Universal Rack Rail |
|
A - Width Rails Each Rack includes 4 each rack rails in compliance with the industry standard for 19-inch wide rack mount equipment. All Rack rack rail is etched every 1-3/4" to fascilitate simplified component mounting. |
B - Depth Rails Each Rack System includes 4 each depth rails. Depth rails are available to build a Rack in 4 distinct depths. All Rack rack rail is etched every 1-3/4" to fascilitate simplified component mounting. |
C - Height Rails Each Rack System includes 4 each height rails. Height rails are available to build a Rack in 10 distinct rack heights. All rack rail is etched every 1-3/4" to facsilitate simplified component mounting. |
|
: |
||
 D- Connecting Corners Used to attach all adjoining rack rails and tightly secure your Rack into an incredibly strong and stable "Rack" structure. Each Connecting Corner is precisely cast in zinc alloy for ultimate strength & endurance. |
|
E- Dog Point Screws Used to attach all connecting corners to corresponding width, depth & height rack rails. Ample dogpoint screws are including in each Rack Master Pack A to fully assembly eight connecting corners to corresponding width, depth & height rack rails.
|
F- 3" Twin-wheel Casters Set of 4, 3" diameter, twin-wheel casters having total weight capacity of 400 lbs. combined. All casters have a full 360 degree swivel. Two of the set of four casters have a positive engaging braking system.
|
G- Side Handles (optional) For easy maneuverability and lifting your Rack, we recommend using our Side Handles option. Side handles also serve to provide additional stabilization of the entire Rack System.
|
H- Cross Braces (optional) For added stability under high weight loads in your Rack, we recommend using our Cross Brace kit option. |
|
*Fully loaded Rack should not exceed 400 lbs. It is the users responsibility when mounting rack equipment to distribute equipment weight appropriately. |
||
|
Star Case Manufacturing
Co., Inc.
The data contained in this document is the
property of Star Case Manufacturing Co., Inc. and is not to be
reproduced or distributed |
