|
|
|
|
ATA 300
|
Star Cases are built and supplied in conformity with
the "Dangerous Good" clause of the IATA (International Air Transport
Association) Variations 2009, section FX-13
Click here to review
[Federal Register: (Volume 64, Number 160)] Docket No. HM-224A
Compliance date: March 1, 2000
|
Excerpt from page 45392: Some types of [[Page 45392]] cylinders may only be shipped in strong outside packagings, regardless of whether or not the cylinder incorporates a valve (see 49 CFR 173.301(k)). An overpack or outer packaging commonly used by the airlines to transport their oxygen cylinders is the ATA Specification No. 300, Packaging of Airline Supplies, Category I. An ATA Specification No. 300 Category I (ATA 300) overpack or outer packaging is a resilient, durable overpack intended to be reused for a minimum of 100 round trips which meets specified performance standards, as demonstrated by design tests (e.g., drop test and puncture resistance). The overpack or outer packaging must also provide protection from shock and vibration.
|
For details and the entire text of Docket No. HM-224A, click here:
Visit the Star Case store to find the
perfect fit for your
High Pressure Gas Cylinders
| Federal Register docket #HM-224A states clearly that all high pressure oxygen cylinders stored or transported on board any U.S. commercial aircraft must be protected within an ATA (Air Transport Association) specification 300, category I compliant container. For further information on this critical requirement click here. Turnaround for standard case models is 7-10 working days from receipt of order. | Turnaround for custom configurations
involving multiple oxygen cylinders in one container or for multiple
quantities of any case design will range from 10-21 working
days. Star Case also specializes in highly protective ATA compliant cases for virtually every component involved in the safe operation of modern commercial and military aircraft. We encourage your further inquiry. |
|
Star Case Manufacturing
Co., Inc.
The data contained in this document is the
property of Star Case Manufacturing Co., Inc. and is not to be
reproduced or distributed |
