Rack Accessories

Part # RFCASTERS
$29.95

Twin-Wheel Casters (2 swivel & 2-swivel/locking)
Set of 4 heavy-duty, 3" diameter, smooth rolling, full-swivel casters add maximum mobility to your Rack. Casters mount by screw-in shaft that links soundly to steel corner connectors. Locking system is by means of tooth-in-gear system for fail-safe rack lock-down. Twin-wheels roll independently of one and other for effortless rolling. If you should decide later that you'd prefer caster mobility on your Rack, this option can be easily added at that time.*

Part #
RFBRACES
$29.95

For added security and stability of taller Racks or LAN stations when overall weight of your Rack is in the plus 500 lbs. area, we recommend the use of our Cross Brace kit in either steel or aluminum.

Note how cross
braces are installed to upper and/or lower sides of Rack

Part #
AFBRACES
$60.00

Cross Braces (set of 4 plus 16 mounting screws)
For added security and stability of taller Racks or LAN stations when overall weight of your Rack is in the plus 500 lbs. area, we recommend the use of our Cross Brace kit in either steel or aluminum. Cross Braces are the ideal solution where seismic occurrences might take place or situations calling for ground or airborne vehicular installations of steel or aluminum racks. Each solid steel or aluminum cross brace mounts at 45 degree angles at top and/or bottom of both sides of your rack. 16 each 10-32 x 5/8" steel mounting screws are included.

Part # RFHANDLE20	Part # RFHANDLE	Part # RFHANDLE30
20" Side Handles	25" Side Handles	30" Side Handles
*$24.95*	*$29.95*	*$34.95*

Side Handles (set of 2 plus 8 mounting screws)
Side handles in 2 distinct sizes for 20", 25" & 30" depth Racks. Side handle plates have smooth, turned upper and lower edges for added structural strength. These side handles serve both as a convenient means of lifting and moving your rack as well as provide structural reinforcement to the overall rack structure. 8 each 10-32 x 5/8" steel mounting screws are included.

Part # RFSHELF19

19" Width Shelf

$29.95

Fixed 19" Cantilever Shelf (1 each with 4 mounting screws)
Cantilever design RFSHELF19 is 19" (17-1/2" useable) in width. The RFSHELF19 occupies 2 rack units of space and is 14-3/4" deep. Weight capacity is 50 pounds. Fixed shelves serve as an excellent means for mounting non-rackmountable components such as tower or desktop CPU's, audio components, video recorders, etc. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. 4 each 10-32 x 5/8" steel mounting screws are included.

Part # RFSHELF17SL
19" Glide mounted Shelf/Drawer
$69.95

19" Glide Mounted Shelf (1 each with mounting screws)
A Star Case exclusive and unique design, this expanding, adjustable sliding shelf is 19" (16-1/2" useable) width. The shelf firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. It can be flipped 180 degrees to become a 1RU height rack drawer. Mounts in racks with depths from 17" to 26-1/4". Mounting in racks deeper than this requires our Component Rear Support System. This glide mounted shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is a stout 50 pounds. 8 each 10-32 x 5/8" steel mounting screws are included.

Click Here for Details

Expandable & Adjustable 19" Wide Rack Shelf - A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. The expandable shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is a stout 150 pounds.

Part # RFSHELF30SL
$99.95

RFSHELF30SL

Expandable Shelf (1 each with 8 mounting screws)
A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is a stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included.

RFSHELF30SL (mounted)

(top view expanded)

Elastomeric isolation mounts are high tech devices that can be integrated into rack cases and custom cases to achieve vibration-free results. They can also be used to achieve shock & vibration isolation for individual components, shelves, drawers, and entire assemblies of equipment when mounted in mobile vehicles such as those used for field broadcast use, military applications and situations inherent to seismic environments. They're inexpensive, simply but intelligently designed, highly effective and incredibly rugged.

Part # 4HARISOMOUNTCH
$9.97

Elastomeric Isolation Mount
Elastomeric isolation mounts are high tech devices that can be integrated into rack cases and custom cases to achieve vibration-free results. They can also be used to achieve shock & vibration isolation for individual components, shelves, drawers, and entire assemblies of equipment when mounted in mobile vehicles such as those used for field broadcast use, military applications and situations inherent to seismic environments. They're inexpensive, simply but intelligently designed, highly effective and incredibly rugged.

Part # RFLEVFT4
$9.95

Leveling Feet
Teflon padded leveling feet for Steel or Aluminum racks, 4 each, weight capacity 1800 pounds. Mounting shaft is 5/16" standard thread attached to 3/8" high, 1-1/4" diameter teflon padded foot. Overall mounting shaft length is 1-7/8". Weight per set of 4 - 12 oz. Please note: A set of 4 RFLEVFT4 leveling feet are already included in the price with every Steel or Aluminum Pre-Pack Kit and Master Pack.

Part #
RFSW10
(10 PACK)
$1.95

5/8" long, 10-32 round Phillips head rack screws with nylon protective washer(10 pack or 100 pack)
Standard rackmount screws and plastic mar-resistant washers used for mounting components in all Star Case rack products as well as all universal 10-32 threaded rack rails. Available in a 10 pack (RFSW10) or 100 pack (RFSW100).

Part #
RFSW100
(100 PACK)
$11.95

Part #
RFSWDP10
(10 PACK)
$2.95

7/8" long, 10-32 round Phillips head, dog point tip rack screws with nylon protective washer(10 pack or 100 pack)
Extended 7/8" length dog point rackmount screws and plastic mar-resistant washers used for mounting components in all Star Case rack products as well as all universal 10-32 threaded rack rails. The dogpoint screw design eliminates the screw threads at the screw tip to facilitate faster and more fail-safe screw to hole alignment. The dog point design greatly reduces the likelihood of mis-threading and stripping of rack rail holes. Available in a 10 pack (RFSWDP10) or 100 pack (RFSWDP100).

Part #
RFSWDP100
(100 PACK)
$19.95

Cage nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage nuts snap easily into 3/8" square rack holes.

Part #
RFCN10 (10 PACK)
$3.95

Bag of 10 pieces - 6M (6mm), 5/8" long, philips head rack screws, cage nuts & cup washers
Cage nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage nuts snap easily into 3/8" square rack holes. A Cage Nut application does not require special tools or skills, eliminating the need for special operations. The nut floats within the spring-steel cage more than enough to offset normal hole misalignment. Weight per bag of 10 is 3 oz.

Part #
RFCN50 (50 PACK)
$17.95

Bag of 50 pieces - 6M (6mm), 5/8" long, philips head rack screws, cage nuts & cup washers
Cage nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage nuts snap easily into 3/8" square rack holes. A Cage Nut application does not require special tools or skills, eliminating the need for special operations. The nut floats within the spring-steel cage more than enough to offset normal hole misalignment. Weight per bag of 50 is 1 lb.

Part #
BN4 (4 PACK)
$1.95

Bag of 4 - 1" long, 1/4-20 bolts & elastic stop nuts.
The set of bolts & stop nuts is intended for positive fastening of two steel or aluminum frames of equal width & depth when stacking the two racks together. Both bolts & nuts are nickel plated. Weight per pack is 2 oz.

he Star Case Thread Rescue Kit conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors using the industry accepted 10-32 tapped mounting hole configuration.

Part #
RFTHREADPAC10
Click For Adobe Acrobat instructions,
Click For .jpg instructions

$3.95

Thread Rescue Kit (10 pieces each) 10-32 x 7/8" dog point oval head screws, 10-32 barrel nuts and 10-32 keps nuts
Ever found yourself installing rack components with that new 18 volt cordless only to find out, too late, that it was set to the "drill" setting and not the "screw" setting? Next thing you know, that cleanly threaded 10-32 tapped hole now looks like the inside of a drinking straw! Not to worry!! Star Case has evolved a real savior when it comes to dealing with stripped rack rail holes. This innovative solution permits rescue of stripped component mounting holes or corner connector attachment points where rails are accidentally over tightened and stripped. The Star Case Thread Rescue Kit conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors using the industry accepted 10-32 tapped mounting hole configuration.

20" DEPTH SIZES

Side Panels (2 each with mounting screws)
Side panels are available in 6 standard height sizes and 3 standard depth sizes as outlined below. If you need a cleaner look with no side exposure to your rack for either thermal or aesthetic reasons, the Side Panel option is the perfect solution. We also offer 34 additional height sizes of 20", 25" & 30" depth side panels. Side panels are a lightweight, flat black PVC compound precisely fitted to the sides of your Rack. Coupled with the Cover Panel option, you can thoroughly enclose both sides, top & bottom of your Rack.

25" DEPTH SIZES

30" DEPTH SIZES

Steel COVER PANELS are sold individually as an effective way of covering either the top and/or bottom of your Rack.

Part #
RFCOVPAN20
$24.95

COVER PANEL (each) with mounting screws
Steel COVER PANELS are sold individually as an effective way of covering either the top and/or bottom of your Rack. COVER PANELS are available in 20", 25" or 30" depth.
The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc.

Part #
RFCOVPAN25
$29.95

Part #
RFCOVPAN30
$34.95

Part #
RF1SP
$6.95

1RU (1-3/4") high, 2RU (3-1/2"), 3RU (5-1/4" & 4RU (7") steel rack filler panels (blanking panels)
Filler Panels - Our 1, 2, 3 & 4 RU steel filler panels and blanking panels are manufactured of premium grade steel and finished in a smooth, flat powder coat finish. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components.
The 1RU, 2RU, 3RU & 4RU filler panels conform to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

Part #
RF2SP
$8.95

Part #
RF3SP
$11.95

Part #
RF4SP
$14.95

Rack Drawer - 2 RU (3-1/2") all steel construction rackmountable drawers easily mount into any standard 19" rack width Rack (or any other rackmount enclosure). Each drawer occupies 2 rack units of vertical rack space and conveniently lock in the closed position.

Click Here for Details

Part #
RFDRAW2

2 RU (3-1/2") high, 19" rackmountable, 14-1/2" deep steel rack drawer on roller glides, with key lock
Rack Drawer - Our 2 RU (3-1/2") all steel construction rackmountable drawers easily mount into any standard 19" rack (or any other rackmount enclosure). Each drawer occupies 2 rack units of vertical rack space and conveniently lock in the closed position.
The 2RU Steel Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

50% Lighter Weight
Click Here for Details

Part #
AFDRAW2
$129.00

2 RU (3-1/2") high, 19" rackmountable, 14-1/2" deep aluminum rack drawer on roller glides, with key lock
Rack Drawer - Our 2 RU (3-1/2") all aluminum construction rackmountable drawers are 1/2 the weight of our steel drawer counterpart and easily mount into any standard 19" rack (or any other rackmount enclosure). Each drawer occupies 2 rack units of vertical rack space and conveniently lock in the closed position.
The 2RU Aluminum Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

Rack Drawer - 3 RU (5-1/4") all steel construction rackmountable drawers easily mount into any standard 19" rack width Rack (or any other rackmount enclosure). Each drawer occupies 3 rack units of vertical rack space and conveniently lock in the closed position.

Click Here for Details

Part #
RFDRAW3

3 RU (5-1/4") high, 19" rackmountable, 14-1/2" deep steel rack drawer on roller glides, with key lock
Rack Drawer - Our 3 RU (5-1/4") all steel construction rackmountable drawers easily mount into any standard 19" rack (or any other rackmount enclosure). Each drawer occupies 3 rack units of vertical rack space and conveniently lock in the closed position.
The 3RU Steel Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

50% Lighter Weight
Click Here for Details

Part #
AFDRAW3
$164.00

3 RU (5-1/4") high, 19" rackmountable, 14-1/2" deep aluminum rack drawer on roller glides, with key lock
Rack Drawer - Our 3 RU (5-1/4") all aluminum construction rackmountable drawers are 1/2 the weight of our steel drawer counterpart and easily mount into any standard 19" rack (or any other rackmount enclosure). Each drawer occupies 3 rack units of vertical rack space and conveniently lock in the closed position.
The 3RU Aluminum Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

Our 4 RU (7") all steel construction rackmountable drawers easily mount into any standard 19" rack width Rack (or any other rackmount enclosure). Each drawer occupies 4 rack units of vertical rack space and conveniently lock in the closed position.

Click Here for Details

Part #
RFDRAW4
$99.95

4 RU (7") high, 19" rackmountable, 14-1/2" deep steel rack drawer on roller glides, with key lock
Our 4 RU (7") all steel construction rackmountable drawers easily mount into any standard 19" rack (or any other rackmount enclosure). Each drawer occupies 4 rack units of vertical rack space and conveniently locks in the closed position.
The 4RU Steel Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

50% Lighter Weight
Click Here for Details

Part #
AFDRAW4
$199.00

4 RU (7") high, 19" rackmountable, 14-1/2" deep aluminum rack drawer on roller glides, with key lock
Rack Drawer - Our 4 RU (7") all aluminum construction rackmountable drawers are 1/2 the weight of our steel drawer counterpart and easily mount into any standard 19" rack (or any other rackmount enclosure). Each drawer occupies 4 rack units of vertical rack space and conveniently locks in the closed position.
The 4RU Aluminum Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

Click Purchase Details for
Introductory Discount Offer!

6 RU (10-1/2") high, 19" rackmountable, 14-1/2" deep steel rack drawer on roller glides, with key lock
Rack Drawer - Our unique & proprietary 6 RU (10-1/2") all steel construction rackmountable drawer easily mount into any standard 19" rack (or any other rackmount enclosure). This drawer has a 14-1/4" depth and can accommodate standard letter size hanging folders. Each drawer occupies 6 rack units of vertical rack space and conveniently locks in the closed position.
The 6RU Steel Drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

Click Here for Details

Part #
RFDRAW6
$149.95

Convert the RFDRAW6 into a Hanging Folder File Drawer
Click Here for Details

Part #
RFD6CLIPROD
$6.95

CLIPS and RODS to convert an RFDRAW6 into a rackmountable hanging file drawer
The RFD6CLIPROD option, when used with our 6RU (10-1/2") high rackmount drawer (RFDRAW6), provides a heavy-duty, highly functional hanging folder system.
Once the CLIPS are attached to the drawer sides and the RODS are fitted into the clips, you'll be able to laterally suspend a stack of hanging folders. Even with vinyl hanging tabs attached, drawer opens & closes smoothly.

Keyboard Drawer - 2 RU (3-1/2") all steel construction rackmountable keyboard shelf handles most keyboards no wider than 16-3/4" in width. Beneath the keyboard shelf is a left or right extending mouse tray. Keyboard shelf installs like any other rackmount component and can be mounted in your Rack (or any other EIA standard rackmount enclosure) at any desired height.

Click Here for Details

Part #
RFKEYBRD2

2 RU (3-1/2") high, 19" rackmountable, steel keyboard shelf with left or right extending mouse tray
Keyboard Drawer - Our 2 RU (3-1/2") all steel construction rackmountable keyboard drawer handles most keyboards no wider than 16-3/4" in width. Beneath the keyboard shelf is a left or right extending mouse tray. Keyboard shelf installs like any other rackmount component and can be mounted in your Rack (or any other EIA standard rackmount enclosure) at any desired height.
The 2RU Steel Keyboard Shelf with Mouse Tray conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors.

Star Case Exclusive - - Rack Component Support System
for horizontal and/or vertical component or drawer support.

The Rack Component Support System is priced from $13.90 to $28.85 depending on the rack mount option selected to provide support for rack components fastening to rear rack rails.

click here for detailed installation instructions

Part #
RFCB
$6.95

This set of curl brackets, 10-32 rack screws and keps nuts is the main fastening elements that permit our highly effective component support system to tightly attach the rear of your components to either the rear or top of your steel or aluminum rack. Depending on where you attach the curl brackets your components, drawers, etc. will have either top suspension support or rear perpendicular support. The end result is no more bent face panels or damaged components, rack drawers, etc. due to rough transiting in shipping racks or through any kind of vehicular transport. Don't forget, depending on the type of installation you anticipate, you'll need this curl bracket and fastener set as well as either or both pair of link strips offered.

Part #
RFCBLK07
$6.95

This set of 7" link strips is used to connect the back end of your component, drawer, etc. to the curl brackets fastened to the rear rack rails of your rack frame, enclosure or shipping case. If you're using a Star Case steel or aluminum rack, you can mount your curl brackets to the upper depth rails and use the 7" link strips to provide suspension or hanging support. No matter whether you're seeking horizontal support or vertical hanging support, this option is sure to hold your rackmount component, drawer, etc. firmly in place with maximum support no matter what the load.
These link strips are also available in a 19-1/4" length depending on the depth of your rack enclosure, component, or drawer.

Part #
RFCBLK19
$14.95

This set of 19-1/4" link strips is used to connect the back end of your component, drawer, etc. to the curl brackets fastened to the rear rack rails of your rack frame, enclosure or shipping case. If you're using a Star Case steel or aluminum rack, you can mount your curl brackets to the upper depth rails and use the 19-1/4" link strips to provide suspension or hanging support. No matter whether you're seeking horizontal support or vertical hanging support, this option is sure to hold your rackmount component, drawer, etc. firmly in place with maximum support no matter what the load.
These link strips are also available in a 7" length depending on the depth of your rack enclosure, component, or drawer.

19" Rack Trim Panels serve a dual purpose. They cover the small opening created by the angled contour of the corner connectors at the top and/or bottom of your Rack.

Part #
RFTRIM19
$14.95

Trim Panels (pair) with mounting screws
These 19" Rack Trim Panels serve a dual purpose. They cover the small opening created by the angled contour of the corner connectors at the top and/or bottom of your Rack. They also provide a means for identifying your Rack with your project name, corporate name or listing user instructions.

* NOTE: Fully loaded Rack should not exceed a total weight
of 800 lbs. It is the users responsibility when mounting rack
equipment to distribute equipment weight appropriately.