|
|
|
|
Rack Options &
Accessories - Professional Series Racks
| PROFESSIONAL SERIES RACKS DEDICATED OPTIONS & ACCESSORIES | ||||
| Casters, Braces & Handles | ||||
RFCASTERS For
details click here |
Set of 4, 3" diameter swivel furniture casters for occasional rack movement. Casters have a threaded stud which mates with a threaded hole in the metal corner connectors. Casters can locked into non-rotating mode by means of a positive tooth-in-gear system. If you should decide later that you'd prefer to add casters on your Rack, this option can be easily added at that time. STATIC Weight capacity per set of 4 casters – 400 pounds. Weight per set of 4 casters is 1.8 lbs. |
 |
$29.95 Set of 4 Wt. Per Set - 1.8 lbs.  |
|
| RFCASTERSHD20 | FOR 20" DEPTH STAR FRAMES: This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth steel or aluminum Star Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board. |
 |
$149 Wt. Each- 16 lbs. |
|
| RFCASTERSHD25 | FOR 25" DEPTH STAR FRAMES: This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth steel or aluminum Star Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board. |
|
$159 Wt. Each- 17 lbs. |
|
| RFCASTERSHD30 | FOR 30" DEPTH STAR FRAMES: This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth steel or aluminum Star Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board. |
|
$169 Wt. Each- 18 lbs. |
|
|
RFBRACESFor details click
here |
For added security and stability of taller Racks or LAN stations when overall weight of your Rack is in the plus 500 lbs. area, we recommend the use of our Cross Brace kit in either steel or aluminum. Cross Braces are the ideal solution where seismic occurrences might take place or situations calling for ground or airborne vehicular installations of steel or aluminum racks. Each solid steel or aluminum cross brace mounts at 45 degree angles at top and/or bottom of both sides of your rack. 16 each 10-32 x 5/8" steel mounting screws are included. Weight per set of 4 is 1.8 lbs. |
 |
$29.95 Set of 4 Wt. Per Set - 1.8 lbs. |
|
|
AFBRACESFor details click
here |
For added security and stability of taller Racks or LAN stations when overall weight of your Rack is in the plus 500 lbs. area, we recommend the use of our Cross Brace kit in either steel or aluminum. Cross Braces are the ideal solution where seismic ocurences might take place or situations calling for ground or airborne vehicular installations of steel or aluminum racks. Each solid steel or aluminum cross brace mounts at 45 degree angles at top and/or bottom of both sides of your rack. 16 each 10-32 x 5/8" steel mounting screws are included. Weight per set of 4 is 12 oz. |
 |
$60.00 Wt. Per Set - <1 lb. |
|
|
RFHANDLE20For details click
here |
Pair of 2 each, 20" depth, lifting side-mount handles and mounting hardware. Weight per pair is 5 lbs. |
 |
$30.95 Wt. Per Pair - 5 lbs. |
|
|
RFHANDLEFor details click
here |
Pair of 2 each, 25" depth, lifting side-mount handles and mounting hardware. Weight per pair is 5.8 lbs. |
 |
$29.95 Wt. Per Pair - 6.4 lbs. |
|
|
RFHANDLE30For details click
here |
Pair of 2 each, 30" depth, lifting side-mount handles and mounting hardware. Weight per pair is 6.4 lbs. |
 |
$34.95 Wt. Per Pair - 5.8 lbs. |
|
|
RFCOVPAN20For details click
here |
20" depth panel (each) to enclose top and/or bottom area of Rack. The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc. Weight each is 5.75 lbs. |
 |
$24.95 Wt. Each- 5.75 lbs. |
|
|
RFCOVPAN25For details click
here |
25" depth panel (each) to enclose top and/or bottom area of Rack. The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc. Weight each is 7.5 lbs. |
|
$29.95 Wt. Each- 7.5 lbs. |
|
|
RFCOVPAN30For details click
here |
30" depth panel (each) to enclose top and/or bottom area of Rack. The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc. Weight each is 8.8 lbs. |
|
$34.95 Wt. Each- 8.6 lbs. |
|
| Side Panels | ||||
|
20" Depth Side Panels  For details click
here |
20" depth side panels (pair) to fit
racks ranging in height from 4RU through 43RU. Need 20" depth Side Panels? Click Here. |
 |
|
|
|
25" Depth Side Panels For details click
here |
25" depth side panels (pair) to fit racks ranging
in height from 4RU through 43RU. Need 25" depth Side Panels? Click Here. |
|
|
|
|
30" Depth Side Panels For details click
here |
30" depth side panels (pair) to fit racks ranging in
height from 4RU through 43RU. Need 30" depth Side Panels? Click Here. |
|
|
|
|
ALL EIA 19" EQUIPMENT
RACK OPTIONS & ACCESSORIES Shelves |
||||
RFSHELF19 For details click
here |
Cantilever design RFSHELF19 is 19" (17-1/2" useable) in width. The RFSHELF19 occupies 2 rack units of space and is 14-3/4" deep. Weight capacity is 50 pounds. Fixed shelves serve as an excellent means for mounting non-rackmountable components such as tower or desktop CPU's, audio components, video recorders, etc. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. 4 each 10-32 x 5/8" steel mounting screws are included. |
 |
$29.95 Wt. Per Shelf 5.5 lbs. |
|
|
RFSHELF19-6PKFor details click
here |
Buy 6, while supplies last, for
$150.00 ($25.00 ea.) - Save $30.00! Cantilever design RFSHELF19 is 19" (17-1/2" useable) in width. The RFSHELF19 occupies 2 rack units of space and is 14-3/4" deep. Weight capacity is 50 pounds. Fixed shelves serve as an excellent means for mounting non-rackmountable components such as tower or desktop CPU's, audio components, video recorders, etc. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. 4 each 10-32 x 5/8" steel mounting screws are included. |
|
$25.00 ea. ($150.00 for 6) Wt. Per 6-pack 36 lbs. |
|
|
RFSHELF17SLFor details click
here |
A Star Case exclusive and unique design, this is an expanding, adjustable sliding rack shelf or rack drawer. It firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. It can be flipped 180 degrees to become a 1RU height rack drawer. Mounts in racks with rail-to-rail depths from 18" to 26". Mounting in racks deeper than this requires our Component Rear Support System. This glide mounted rack shelf / rack drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other vendors. Weight capacity is 45 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. |
 |
$69.95 Wt. Each- 9 lbs. |
|
|
RFSHELF30SLFor details click
here |
A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Weight each is 15 lbs. |
 |
$99.95 Wt. Per Shelf 15 lbs. |
|
|
RFSHELF30SL3PKFor details click
here |
Buy 3, while supplies last, for
$89.95 ea. - Save $30.00! A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Weight each is 15 lbs. |
|
$89.95 ea. ($269.85 for 3) Wt. Per Shelf 15 lbs. |
|
|
RFSHELF30SL6PKFor details click
here |
Buy 6, while supplies last, for
$79.95 ea. - Save $120.00! A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Weight each is 15 lbs. |
|
$79.95 ea. ($479.70 for 6) Wt. Per Shelf 15 lbs. |
|
| Drawers & Keyboard Drawers | ||||
|
RFSHELF17SLFor details click
here |
A Star Case exclusive and unique design, this is an expanding, adjustable sliding rack shelf or rack drawer. It firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. It can be flipped 180 degrees to become a 1RU height rack drawer. Mounts in racks with rail-to-rail depths from 18" to 26". Mounting in racks deeper than this requires our Component Rear Support System. This glide mounted rack shelf / rack drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other vendors. Weight capacity is 45 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. |
 |
$69.95 Wt. Each- 9.0 lbs. |
|
|
RFKEYBRD2For details click
here |
2 rack unit glide-mounted keyboard shelf with sliding mouse tray. |
 |
$119.95 Wt. per shelf- 13.15 lbs. |
|
|
RFDRAW2For details click
here |
2 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$79.95 Wt. per drawer- 14.1 lbs. |
|
|
AFDRAW2For details click
here |
50% Lighter Weight than our Steel drawer - only
6 lbs! 2 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) aluminum rackmountable drawer, keylock included. |
 |
$129.00 Wt. per drawer- 6 lbs. |
|
|
RFDRAW3For details click
here |
3 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$89.95 Wt. per drawer- 17.65 lbs. |
|
|
AFDRAW3For details click
here |
50% Lighter Weight than our Steel drawer - only 6.4 lbs! 3 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) aluminum rackmountable drawer, keylock included. |
 |
$164.00 Wt. per drawer- 6.4 lbs. |
|
|
RFDRAW4For details click
here |
4 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$99.95 Wt. per drawer- 18.25 lbs. |
|
|
AFDRAW4For details click
here |
50% Lighter Weight than our Steel
drawer - only 7.5 lbs! 4 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) aluminum rackmountable drawer, keylock included. |
 |
$199.00 Wt. per drawer- 7.5 lbs. |
|
|
RFDRAW6For details click
here |
6 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$149.95 Wt. per drawer- 23 lbs. |
|
| RFD6CLIPROD |
The RFD6CLIPROD option, when used with our 6RU (10-1/2") high rackmount drawer (RFDRAW6), provides a heavy-duty, highly functional hanging folder system. Once the CLIPS are attached to the drawer sides and the RODS are fitted into the clips, you'll be able to laterally suspend a stack of hanging folders. Even with vinyl hanging tabs attached, drawer opens & closes smoothly. |
 |
$6.95 Wt. Each- 1 lb. |
|
| NEW! Star Case Exclusive - - Patent Pending Rackmount Curl Brackets & Link Strip Component Support System for horizontal and/or vertical component or drawer support | ||||
|
RFCBFor details click
here |
This set of curl brackets, 10-32 rack screws and keps nuts is the main fastening elements that permit our highly effective component support system to tightly attach the rear of your components to either the rear or top of your steel or aluminum rack. Depending on where you attach the curl brackets your components, drawers, etc. will have either top suspension support or rear perpendicular support. The end result is no more bent face panels or damaged components, rack drawers, etc. due to rough transiting in shipping racks or through any kind of vehicular transport. Don't forget, depending on the type of installation you anticipate, you'll need this curl bracket and fastener set as well as either or both pair of link strips offered. |
 |
$6.95 Wt. Each- 8 oz.. |
|
|
RFCBLK07For details click
here |
This set of 7" link strips
is used to connect the back end of your component,
drawer, etc. to the
curl brackets fastened to the rear rack rails of your rack frame,
enclosure or shipping case. If you're using a
Star Case steel or
aluminum rack, you can mount your curl brackets to the upper depth
rails and use the 7" link strips to provide suspension or hanging
support. No matter whether you're seeking horizontal support or
vertical hanging support, this option is sure to hold your rackmount
component, drawer, etc. firmly in place with maximum support no matter
what the load. These link strips are also available in a 19-1/4" length depending on the depth of your rack enclosure, component, or drawer. |
 |
$6.95 Wt. Each- 16 oz. |
|
|
RFCBLK19For details click
here |
This set of 19-1/4" link
strips is used to connect the back end of your component,
drawer, etc.
to the curl brackets fastened to the rear rack rails of your rack
frame, enclosure or shipping case. If you're using a
Star Case
steel or aluminum rack, you can mount your curl brackets to the upper
depth rails and use the 19-1/4" link strips to provide suspension or
hanging support. No matter whether you're seeking horizontal
support or vertical hanging support, this option is sure to hold your rackmount component,
drawer, etc. firmly in place with maximum support
no matter what the load. These link strips are also available in a 7" length depending on the depth of your rack enclosure, component, or drawer. |
 |
$14.95 Wt. Each- 48 oz. |
|
| Miscellaneous Options & Accessories | ||||
|
"L" Series Universal Rack Rail For details
click here |
Our "L" Series Universal Rack Rail is also adaptable to nearly any rack enclosure, rack case, rack cabinet or rack custom installation. The facing leg of the rail to which your components mount is 3/4" in width. It has the standard 10-32, EIA spaced & tapped mounting holes. Hole centers are 1/4" in from rail edge. On the opposing leg (1-1/4" in length), are non-threaded installation holes (see photo at right). This facilitates easy retrofitting into other manufacturers rack mounting equipment. If you need additional rack rails to adjust the width, depth or height of your knock down Rack, you'll need our rack rails with dual 10-32 tapped legs. |
 |
Take me to the Universal Rack Rail Online Store! | |
|
"Z" Series Universal Rack Rail For
details click here |
Our "Z" Series Multi-Application Rack Rail is adaptable to a select type of rack installation calling for quick-release component/rail adapters and/or integral component glide systems requiring side installation as well as front installation. The "Z" series rails have standard EIA spaced (3 mounting holes per 1-3/4" EIA rack space) 3/8" (9.53mm) square holes. If so desired, cage nuts incorporating 6mm tapped nuts can be used thus allowing installation by means of tapped rackmount screws & washers. If you need additional rack rails to adjust the width, depth or height of your knock down Rack, you'll need our rack rails with dual 10-32 tapped legs. |
 |
Take me to the Universal Rack Rail Online Store! | |
|
RFLEVFT4For details click
here |
Teflon padded leveling feet for Steel or Aluminum racks, 4 each, weight capacity 1800 pounds. Weight per set of 4 - 12 oz. Note: Already included in the price of every Rack Pre-Pack Kit and Master Pack. |
 |
$9.95 Wt. Each- <1 lbs. |
|
|
RFTRIM19For details click
here |
19" width trim panel (pair) to cover area of Rack above & below mounted components. Weight per pair is 2 oz. |
 |
$14.95 Wt. Each- <1 lbs. |
|
|
4HARISOMOUNTCHFor
details click here |
Elastomeric isolation mount (each). These isolation shock mounts are used in our F8 style shockmount rack cases yet have hundreds of other applications for providing shock isolation for our steel & aluminum racks when mounted in ground or air vehicles or where seismic activity is a concern. |
 (click photo) |
$9.97 Wt. Each- .10 lbs. |
|
|
RFSW10For details click
here |
Bag of 10 - 10-32, 5/8" long, phillips rack screws & washers |
 |
$1.95 Wt. Each- <1 lb. |
|
|
RFSW100For details click
here |
Bag of 100 - 10-32, 5/8" long, phillips head rack screws & washers |
|
$11.95 Bag of 100 Wt. Each- <1 lb. |
|
|
RFSWDP10For details click
here |
Bag of 10 - 10-32, 7/8" long, phillips head, dogpoint tip rack screws & washers. Dogpoint screws with unthreaded screw tip, mount quickly and line up with rail threads more effectively helping to avoid accidentally thread stripping. |
 |
$2.95 Bag of 10 Wt. Each- <1 lb. |
|
|
RFSWDP100For details click
here |
Bag of 100 - 10-32, 7/8" long, phillips head, dogpoint tip rack screws & washers. Dogpoint screws with unthreaded screw tip, mount quickly and line up with rail threads more effectively helping to avoid accidentally thread stripping. |
|
$19.95 Bag of 100 Wt. Each- <1 lb. |
|
|
RFCN10For details click
here |
Bag of 10 - 6M (6mm), 5/8" long, philips head rack screws, cage nuts & cup washers. Cage Nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage Nuts snap easily into 3/8" square rack holes. A Cage Nut application does not require special tools or skills, eliminating the need for special operations. The nut floats within the spring-steel cage more than enough to offset normal hole misalignment. Weight per bag of 10 is 3 oz. |
 |
$3.95 Bag of 10 Wt. Ea. <1lb. |
|
|
RFCN50For details click
here |
Bag of 50 - 6M (6mm), 5/8" long, philips head rack screws, cage nuts & cup washers. Cage Nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage Nuts snap easily into 3/8" square rack holes. A Cage Nut application does not require special tools or skills, eliminating the need for special operations. The nut floats within the spring-steel cage more than enough to offset normal hole misalignment. Weight per bag of 50 is 1 lbs. |
|
$17.95 Bag of 50 Wt. Each- 1 lb. |
|
|
BN4For details click
here |
Bag of 4 - 1" long, 1/4-20 bolts & elastic stop nuts. The set of bolts & stop nuts is intended for positive fastening of two steel or aluminum frames of equal width & depth when stacking the two racks together. Both bolts & nuts are nickel plated. Weight per pack is 2 oz. |
 |
$1.95 Bag of 4 Wt. Each- 2 oz. |
|
|
RFTHREADPAC10For details click
here |
NEW - THREAD RESCUE! An indispensable addition to ever tool box. The perfect solution to stripped rack rail holes - simple, economical & EFFECTIVE! Bag of 10 each 10-32 x 7/8" dog point oval head screws, 10-32 barrel nuts & 10-32 keps nuts. For Adobe Acrobat
instructions, click
hereFor .jpg
instructions, click here |
 |
$3.95 Wt. Each- <1 lb. |
|
| Rack Filler Panels | ||||
| RF1SPFor details click
here |
1 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 12 oz. |
 |
$6.95 Wt. Each- <1 lb. |
|
| RF2SPFor details click
here |
2 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 1.5 lbs. |
 |
$8.95 Wt. Each- 1.5 lbs. |
|
|
RF3SPFor details click
here |
3 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 2 lbs. |
 |
$11.95 Wt. Each- 2.0 lbs. |
|
|
RF4SPFor details click
here |
4 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 2.5 lbs. |
 |
$14.95 Wt. Each- 2.5 lbs. |
|
|
DESIGNER SERIES DEDICATED OPTIONS & ACCESSORIES Casters, Cover Panels & Side Panels |
|||
| RFCASTERS | Set of 4, 3" diameter swivel furniture casters for occasional movement. Casters have a threaded stud which mates with a threaded hole in the metal corner connectors. Casters can be locked into non-rotating mode by means of a positive tooth-in-gear system. If you should decide later that you'd prefer to add casters on your Designer Series Rack, Frame or Stand, this option can be easily added at that time. STATIC Weight capacity per set of 4 casters – 400 pounds. Weight per set of 4 casters is 1.8 lbs. |
|
$29.95 Set of 4 Wt. Per Set 1.8 lbs. |
| DSCASTERSHD20 | FOR 20" DEPTH DESIGNER SERIES RACKS: This option affords you the perfect solution for heavily loaded Designer Series Racks. When your loaded rack is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth Designer Series Rack and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your Designer Series Rack to the rolling dolly board. |
|
$149 Wt. Each- 16 lbs. |
| DSCASTERSHD24 | FOR 24" DEPTH DESIGNER SERIES RACKS: This option affords you the perfect solution for heavily loaded Designer Series Racks. When your loaded rack is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth Designer Series Rack and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your Designer Series Rack to the rolling dolly board. |
|
$159 Wt. Each- 17 lbs. |
| DSCASTERSHD30 | FOR 30" DEPTH DESIGNER SERIES RACKS: This option affords you the perfect solution for heavily loaded Designer Series Racks. When your loaded rack is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth Designer Series Rack and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your Designer Series Rack to the rolling dolly board. |
|
$169 Wt. Each- 18 lbs. |
| DSAD48 | Optional 48RU high (85"x20") key locking semi-transparent smoked acrylic plastic rack door mounts to either front and/or rear of rack. Rack doors are available in 48RU,36RU, 24RU & 12RU heights. Doors attached with 'break-away' type slip hinges to permit quick install and removal and open to 145 degrees. All doors are keyed alike. |
 |
$249 Wt. Each- 16 lbs. |
| DSAD36 | Optional 36RU high (64"x20") key locking semi-transparent smoked acrylic plastic rack door mounts to either front and/or rear of rack. Rack doors are available in 48RU,36RU, 24RU & 12RU heights. Doors attached with 'break-away' type slip hinges to permit quick install and removal and open to 145 degrees. All doors are keyed alike. |
$229 Wt. Each- 12 lbs. |
|
| DSAD24 | Optional 24RU high (43"x20") key locking semi-transparent smoked acrylic plastic rack door mounts to either front and/or rear of rack. Rack doors are available in 48RU,36RU, 24RU & 12RU heights. Doors attached with 'break-away' type slip hinges to permit quick install and removal and open to 145 degrees. All doors are keyed alike. |
$199 Wt. Each- 8 lbs. |
|
| DSAD12 | Optional 12RU high (22"x20") key locking semi-transparent smoked acrylic plastic rack door mounts to either front and/or rear of rack. Rack doors are available in 48RU,36RU, 24RU & 12RU heights. Doors attached with 'break-away' type slip hinges to permit quick install and removal and open to 145 degrees. All doors are keyed alike. |
$179 Wt. Each- 4 lbs. |
|
| DSPXCOVPAN20 | 20" depth smoked plastic cover panels (pair) to enclose top and/or bottom area of Designer Series Rack. Each Cover Panel is manufactured of high grade 1/8" thick smoked plastic. |
 Click to Enlarge |
$39 |
| DSCOVPAN20 | 20" depth PVC cover panels (pair) to enclose top and/or bottom area of Designer Series Rack. Each Cover Panel is manufactured of high grade 1/8" thick PVC (poly vinyl chloride) resin material with a flat black finish. |
 Click to Enlarge |
$39 |
| DSPXCOVPAN24 | 24" depth smoked plastic cover panels (pair) to enclose top and/or bottom area of Designer Series Rack. Each Cover Panel is manufactured of high grade 1/8" thick smoked plastic. |
Click to Enlarge |
$44 |
| DSCOVPAN24 | 24" depth PVC cover panels (pair) to enclose top and/or bottom area of Designer Series Rack. Each Cover Panel is manufactured of high grade 1/8" thick PVC (poly vinyl chloride) resin material with a flat black finish. |
Click to Enlarge |
$44 |
| DSPXCOVPAN30 | 30" depth smoked plastic cover panels (pair) to enclose top and/or bottom area of Designer Series Rack. Each Cover Panel is manufactured of high grade 1/8" thick smoked plastic. |
Click to Enlarge |
$49 |
| DSCOVPAN30 | 30" depth PVC cover panels (pair) to enclose top and/or bottom area of Designer Series Rack. Each Cover Panel is manufactured of high grade 1/8" thick PVC (poly vinyl chloride) resin material with a flat black finish. |
Click to Enlarge |
$49 |
| Designer Series Rack Smoked Plastic Side Panels | 20", 24" or 30" depth side panels (pair) to fit 4RU - 48RU Rack heights. Side Panels thoroughly enclose both sides of Designer Series Racks. Each Side Panel is manufactured of high grade 1/8" thick smoked plastic. |
 Click to Enlarge |
Click Here For |
| Designer Series Rack Flat Black PVC Side Panels | 20", 24" or 30" depth side panels (pair) to fit 4RU - 48RU Rack heights. Side Panels thoroughly enclose both sides of Designer Series Racks. Each Side Panel is manufactured of high grade 1/8" thick PVC (poly vinyl chloride) resin material with a flat black finish. |
 Click to Enlarge |
Click Here For |
Should you need to
return any Rack product, please review our Return Procedures
| Designer Series Racks, Stands & Frames | |||||
|
36 PRE-PACKAGED RACKS |
 |
FRAMES & STANDS |
 |
DEDICATED OPTIONS & ACCESSORIES |
 |
|
Tapped 10-32 Holes |
373,248 Possible Frame Sizes! | ||||
 |
 |
Hinged Acrylic Doors, Side Panels, Shelving, and much more! | |||
