|
|
|
|
|
|
|
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 Distinct Series of Rack Rail are Offered... |
|
|
PROFESSIONAL
SERIES 10-32 TAPPED & 3/8" SQUARE HOLES |
MULTI-APPLICATION SERIES 10-32 TAPPED & 3/8" SQUARE HOLES |
 |
 |
SHOP ANYWHERE FOR A COMPARABLE VALUE. We sell 2 lengths
of rack rail
at about the price others charge for ONLY 1 length of their rack rail.
PROFESSIONAL SERIES RACK RAIL
With our
|
With our Pre-Pack Steel & Aluminum Professional Series Rack
Kit rail sets,
rack rails must extend into and
be securely fastened to the 8 cast connecting corners. The
graphic to the right explains how this will effect the length of
the rails you purchase. Height rails are 2U (3-1/2") longer than the amount of component mounting space they will render, i.e., see graphic at right. A set of height rails such as our part number RFC35U, are actually 64-3/4" (37U) in length, but will yield 2 U (3-1/2") less vertical component mounting space, or 61-1/4" (35U). Note in graphic at right how a set of part number RFC08U rails, 17-1/2" (8U) in length, yield the standard EIA 19" width (18-3/8" hole center-to-center.) |
|
MULTI-APPLICATION RACK RAIL
With our Multi-Application Steel Rack Rail we offer 43 different lengths ranging from 2U (3-1/2") to 45U (78-3/4") in three hole pattern configurations. Our L-Series steel rails have 10-32 tapped holes on a 3/4" leg and 9/32" untapped holes on the opposing 1-1/4" leg. Our Z-Series steel rails have dual facing 3/8" square holes on a 3/4" leg with a 2-1/8" connecting leg with 9/32" untapped holes.
By using the Electronics' Industry Alliance (E.I.A.) standard 1-3/4 inch increment, repeating hole pattern, also commonly referred to as a "RACK SPACE" or "RACK UNIT", you have a wide range of sizes available to fit many diverse component configurations. Star Case rack rail conforms precisely with all applicable EIA specifications - both in terms of overall gauge & strength as well as dimensionality. Ours is the professionals choice for all 19" rack rail applications calling for EIA compliant rack rails in the 10-32 tapped rack rail configuration.
As shown in the graphic below, every 1-3/4" increment along the length of each rack rail is precisely tapped to accept the industry standard 10-32 screw pitch pattern. Couple this close attention to manufacturing detail with the component installation convenience of etched cutting marks every 1-3/4" along the entire length of each rack rail makes Star Case rack rail the professionals choice. It's ideally suited for video and production components, test and measurement equipment, audio devices, computer servers; even all sizes of telecom rack components as well.
|
|
Should you need to
return any Rack product, please review our Return Procedures
|
Star Case Manufacturing
Co., Inc.
The data contained in this document is the
property of Star Case Manufacturing Co., Inc. and is not to be
reproduced or distributed |
