|
|
|
|
|
Don't forget! Do you need 10-32 rack
screws & washers and/or rail mounting hardware? Click here |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 Distinct Series of Rack Rail are Offered... |
|||
|
PROFESSIONAL
SERIES 10-32 TAPPED & 3/8" SQUARE HOLES |
DS SERIES 10-32 TAPPED HOLES |
MULTI-APPLICATION SERIES 10-32 TAPPED & 3/8" SQUARE HOLES |
|
 |
For Use in Extruded |
 |
 |
 |
|||
.
PROFESSIONAL SERIES RACK RAIL
|
With our Pre-Pack Steel & Aluminum Professional Series Rack
Kit rail sets,
rack rails must extend into and
be securely fastened to the 8 cast connecting corners. The
graphic to the right explains how this will effect the length of
the rails you purchase. Height rails are 2RU (3-1/2") longer than the amount of component mounting space they will render, i.e., see graphic at right. A set of height rails such as our part number RFC35RU, are actually 64-3/4" (37RU) in length, but will yield 2 RU (3-1/2") less vertical component mounting space, or 61-1/4" (35RU). Note in graphic at right how a set of part number RFC08RU rails, 17-1/2" (8RU) in length, yield the standard EIA 19" width (18-3/8" hole center-to-center.) |
|
DESIGNER SERIES RACK RAIL
O
ur new "D" Series rack rail is extruded from aerospace grade aluminum with an attractive satin finish black powder coat. The component mounting leg of the extrusion extends 3/4" of an inch and is pre-drilled with 10-32 tapped mounting holes spaced in precise accordance with the EIA (Electronics Industries Alliance) standards. Rail mounting leg is 9/64" thick. Balance of "D" Series extrusion structure is 3/32" thick. "D" Series rack rail is available in sets of 4 rails ranging in length from 2RU (3-1/2") to 48RU (84"). We offer 36 pre-packaged kits in 12 different heights and 3 different depths. If your needs call for a Designer Series Rack that varies from our stock heights, please make your "D" Series rack rail choice from those offered on this page. For variations in depth and/or width, select your custom Designer Series extrusions and cast corner connectors from our custom frames page. For technical questions or design assistance, please contact our technical assistance department at (800)822-7827.MULTI-APPLICATION RACK RAIL
With our Multi-Application Steel Rack Rail we offer 43 different lengths ranging from 2RU (3-1/2") to 45RU (78-3/4") in three hole pattern configurations. Our L-Series steel rails have 10-32 tapped holes on a 3/4" leg and 9/32" untapped holes on the opposing 1-1/4" leg. Our Z-Series steel rails have dual facing 3/8" square holes on a 3/4" leg with a 2-1/8" connecting leg with 9/32" untapped holes.
By using the Electronics' Industry Alliance (E.I.A.) standard 1-3/4 inch increment, repeating hole pattern, also commonly referred to as a "RACK SPACE" or "RACK UNIT", you have a wide range of sizes available to fit many diverse component configurations. Star Case rack rail conforms precisely with all applicable EIA specifications - both in terms of overall gauge & strength as well as dimensionality. Ours is the professionals choice for all 19" rack rail applications calling for EIA compliant rack rails in the 10-32 tapped rack rail configuration.
As shown in the graphic below, every 1-3/4" increment along the length of each rack rail is precisely tapped to accept the industry standard 10-32 screw pitch pattern. Couple this close attention to manufacturing detail with the component installation convenience of etched cutting marks every 1-3/4" along the entire length of each rack rail makes Star Case rack rail the professionals choice. It's ideally suited for video and production components, test and measurement equipment, audio devices, computer servers; even all sizes of telecom rack components as well.
|
|
| OPTIONS & ACCESSORIES | ||||
| Casters, Braces & Handles | ||||
RFCASTERS For
details click here |
Set of 4, 3" diameter swivel furniture casters for occasional rack movement. Casters have a threaded stud which mates with a threaded hole in the metal corner connectors. Casters can locked into non-rotating mode by means of a positive tooth-in-gear system. If you should decide later that you'd prefer to add casters on your Rack, this option can be easily added at that time. STATIC Weight capacity per set of 4 casters – 400 pounds. Weight per set of 4 casters is 1.8 lbs. |
 |
$29.95 Set of 4 Wt. Per Set - 1.8 lbs.  |
|
| RFCASTERSHD20 | FOR 20" DEPTH STAR FRAMES: This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth steel or aluminum Star Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board. |
 |
$149 Wt. Each- 16 lbs. |
|
| RFCASTERSHD25 | FOR 25" DEPTH STAR FRAMES: This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth steel or aluminum Star Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board. |
|
$159 Wt. Each- 17 lbs. |
|
| RFCASTERSHD30 | FOR 30" DEPTH STAR FRAMES: This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. Simply assemble your standard depth steel or aluminum Star Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board. |
|
$169 Wt. Each- 18 lbs. |
|
|
RFBRACESFor details click
here |
For added security and stability of taller Racks or LAN stations when overall weight of your Rack is in the plus 500 lbs. area, we recommend the use of our Cross Brace kit in either steel or aluminum. Cross Braces are the ideal solution where seismic occurrences might take place or situations calling for ground or airborne vehicular installations of steel or aluminum racks. Each solid steel or aluminum cross brace mounts at 45 degree angles at top and/or bottom of both sides of your rack. 16 each 10-32 x 5/8" steel mounting screws are included. Weight per set of 4 is 1.8 lbs. |
 |
$29.95 Set of 4 Wt. Per Set - 1.8 lbs. |
|
|
AFBRACESFor details click
here |
For added security and stability of taller Racks or LAN stations when overall weight of your Rack is in the plus 500 lbs. area, we recommend the use of our Cross Brace kit in either steel or aluminum. Cross Braces are the ideal solution where seismic ocurences might take place or situations calling for ground or airborne vehicular installations of steel or aluminum racks. Each solid steel or aluminum cross brace mounts at 45 degree angles at top and/or bottom of both sides of your rack. 16 each 10-32 x 5/8" steel mounting screws are included. Weight per set of 4 is 12 oz. |
 |
$60.00 Wt. Per Set - <1 lb. |
|
|
RFHANDLE20For details click
here |
Pair of 2 each, 20" depth, lifting side-mount handles and mounting hardware. Weight per pair is 5 lbs. |
 |
$24.95 Wt. Per Pair - 5 lbs. |
|
|
RFHANDLEFor details click
here |
Pair of 2 each, 25" depth, lifting side-mount handles and mounting hardware. Weight per pair is 5.8 lbs. |
 |
$29.95 Wt. Per Pair - 6.4 lbs. |
|
|
RFHANDLE30For details click
here |
Pair of 2 each, 30" depth, lifting side-mount handles and mounting hardware. Weight per pair is 6.4 lbs. |
 |
$34.95 Wt. Per Pair - 5.8 lbs. |
|
| Shelves | ||||
RFSHELF19 For details click
here |
Cantilever design RFSHELF19 is 19" (17-1/2" useable) in width. The RFSHELF19 occupies 2 rack units of space and is 14-3/4" deep. Weight capacity is 50 pounds. Fixed shelves serve as an excellent means for mounting non-rackmountable components such as tower or desktop CPU's, audio components, video recorders, etc. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. 4 each 10-32 x 5/8" steel mounting screws are included. |
 |
$29.95 Wt. Per Shelf 5.5 lbs. |
|
|
RFSHELF17SLFor details click
here |
A Star Case exclusive and unique design, this is an expanding, adjustable sliding rack shelf or rack drawer. It firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. It can be flipped 180 degrees to become a 1RU height rack drawer. Mounts in racks with rail-to-rail depths from 18" to 26". Mounting in racks deeper than this requires our Component Rear Support System. This glide mounted rack shelf / rack drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other vendors. Weight capacity is 45 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. |
 |
$69.95 Wt. Each- 9.0 lbs. |
|
|
RFSHELF30SLFor details click
here |
A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Weight each is 15 lbs. |
 |
$99.95 Wt. Per Shelf 15 lbs. |
|
|
RFSHELF30SL3PKFor details click
here |
Buy 3, while supplies last, for
$89.95 ea. - Save $30.00! A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Weight each is 13.5 lbs. |
|
$89.95 ea. ($269.85 for 3) Wt. Per Shelf 15 lbs. |
|
|
RFSHELF30SL6PKFor details click
here |
Buy 6, while supplies last, for
$79.95 ea. - Save $120.00! A Star Case exclusive and unique design, this adjustable sliding shelf is 19" (17" useable) width. This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32", thus accommodating all standard rack width & depth configurations. This shelf conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other OEM vendors. Weight capacity is stout 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Weight each is 13.5 lbs. |
|
$79.95 ea. ($479.70 for 6) Wt. Per Shelf 15 lbs. |
|
|
RFCOVPAN20For details click
here |
20" depth panel (each) to enclose top and/or bottom area of Rack. The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc. Weight each is 5.75 lbs. |
 |
$24.95 Wt. Each- 5.75 lbs. |
|
|
RFCOVPAN25For details click
here |
25" depth panel (each) to enclose top and/or bottom area of Rack. The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc. Weight each is 7.5 lbs. |
|
$29.95 Wt. Each- 7.5 lbs. |
|
|
RFCOVPAN30For details click
here |
30" depth panel (each) to enclose top and/or bottom area of Rack. The Cover Panel option adds both functionality as well as added stability. Each Cover Panel is manufactured of high grade 12 gage steel with a flat black powder coat finish. Cover Panels serve a multiple function to both enclose the top and/or bottom of you Rack while providing added strength and stability to the overall rack. Once fastened in place, the Cover Panels serve as shelves and supports for upper or lower mounted components such as printers, monitors, tower CPU's, etc. Weight each is 8.8 lbs. |
|
$34.95 Wt. Each- 8.6 lbs. |
|
| Side Panels | ||||
|
20" Depth Side Panels  For details click
here |
20" depth side panels (pair) to fit
racks ranging in height from 4RU through 43RU. Need 20" depth Side Panels? Click Here. |
 |
|
|
|
25" Depth Side Panels For details click
here |
25" depth side panels (pair) to fit racks ranging
in height from 4RU through 43RU. Need 25" depth Side Panels? Click Here. |
|
|
|
|
30" Depth Side Panels For details click
here |
30" depth side panels (pair) to fit racks ranging in
height from 4RU through 43RU. Need 30" depth Side Panels? Click Here. |
|
|
|
| Drawers & Keyboard Drawers | ||||
|
RFSHELF17SLFor details click
here |
A Star Case exclusive and unique design, this is an expanding, adjustable sliding rack shelf or rack drawer. It firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. It can be flipped 180 degrees to become a 1RU height rack drawer. Mounts in racks with rail-to-rail depths from 18" to 26". Mounting in racks deeper than this requires our Component Rear Support System. This glide mounted rack shelf / rack drawer conforms to all standard 19" EIA rack enclosures, cases, cabinets and frames from Star Case as well as other vendors. Weight capacity is 45 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. |
 |
$69.95 Wt. Each- 9.0 lbs. |
|
|
RFKEYBRD2For details click
here |
2 rack unit glide-mounted keyboard shelf with sliding mouse tray. |
 |
$119.95 Wt. per shelf- 13.15 lbs. |
|
|
RFDRAW2For details click
here |
2 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$79.95 Wt. per drawer- 14.1 lbs. |
|
|
AFDRAW2For details click
here |
50% Lighter Weight than our Steel drawer - only
6 lbs! 2 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) aluminum rackmountable drawer, keylock included. |
 |
$129.00 Wt. per drawer- 6 lbs. |
|
|
RFDRAW3For details click
here |
3 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$89.95 Wt. per drawer- 17.65 lbs. |
|
|
AFDRAW3For details click
here |
50% Lighter Weight than our Steel drawer - only 6.4 lbs! 3 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) aluminum rackmountable drawer, keylock included. |
 |
$164.00 Wt. per drawer- 6.4 lbs. |
|
|
RFDRAW4For details click
here |
4 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$99.95 Wt. per drawer- 18.25 lbs. |
|
|
AFDRAW4For details click
here |
50% Lighter Weight than our Steel
drawer - only 7.5 lbs! 4 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) aluminum rackmountable drawer, keylock included. |
 |
$199.00 Wt. per drawer- 7.5 lbs. |
|
|
RFDRAW6For details click
here |
6 rack unit height, 19" width (16-1/8" useable width x 14-1/4" useable depth) steel rackmountable drawer, keylock included. |
 |
$149.95 Wt. per drawer- 23 lbs. |
|
| RFD6CLIPROD | The RFD6CLIPROD option, when used with our 6RU (10-1/2") high rackmount drawer (RFDRAW6), provides a heavy-duty, highly functional hanging folder system. Once the CLIPS are attached to the drawer sides and the RODS are fitted into the clips, you'll be able to laterally suspend a stack of hanging folders. Even with vinyl hanging tabs attached, drawer opens & closes smoothly. |
 |
$6.95 Wt. Each- 1 lb. |
|
| NEW! Star Case Exclusive - - Patent Pending Rackmount Curl Brackets & Link Strip Component Support System for horizontal and/or vertical component or drawer support | ||||
|
RFCBFor details click
here |
This set of curl brackets, 10-32 rack screws and keps nuts is the main fastening elements that permit our highly effective component support system to tightly attach the rear of your components to either the rear or top of your steel or aluminum rack. Depending on where you attach the curl brackets your components, drawers, etc. will have either top suspension support or rear perpendicular support. The end result is no more bent face panels or damaged components, rack drawers, etc. due to rough transiting in shipping racks or through any kind of vehicular transport. Don't forget, depending on the type of installation you anticipate, you'll need this curl bracket and fastener set as well as either or both pair of link strips offered. |
 |
$6.95 Wt. Each- 8 oz.. |
|
|
RFCBLK07For details click
here |
This set of 7" link strips
is used to connect the back end of your component,
drawer, etc. to the
curl brackets fastened to the rear rack rails of your rack frame,
enclosure or shipping case. If you're using a
Star Case steel or
aluminum rack, you can mount your curl brackets to the upper depth
rails and use the 7" link strips to provide suspension or hanging
support. No matter whether you're seeking horizontal support or
vertical hanging support, this option is sure to hold your rackmount
component, drawer, etc. firmly in place with maximum support no matter
what the load. These link strips are also available in a 19-1/4" length depending on the depth of your rack enclosure, component, or drawer. |
 |
$6.95 Wt. Each- 16 oz. |
|
|
RFCBLK19For details click
here |
This set of 19-1/4" link
strips is used to connect the back end of your component,
drawer, etc.
to the curl brackets fastened to the rear rack rails of your rack
frame, enclosure or shipping case. If you're using a
Star Case
steel or aluminum rack, you can mount your curl brackets to the upper
depth rails and use the 19-1/4" link strips to provide suspension or
hanging support. No matter whether you're seeking horizontal
support or vertical hanging support, this option is sure to hold your rackmount component,
drawer, etc. firmly in place with maximum support
no matter what the load. These link strips are also available in a 7" length depending on the depth of your rack enclosure, component, or drawer. |
 |
$14.95 Wt. Each- 48 oz. |
|
| Miscellaneous Options & Accessories | ||||
|
"L" Series Universal Rack Rail For details
click here |
Our "L" Series Universal Rack Rail is also adaptable to nearly any rack enclosure, rack case, rack cabinet or rack custom installation. The facing leg of the rail to which your components mount is 3/4" in width. It has the standard 10-32, EIA spaced & tapped mounting holes. Hole centers are 1/4" in from rail edge. On the opposing leg (1-1/4" in length), are non-threaded installation holes (see photo at right). This facilitates easy retrofitting into other manufacturers rack mounting equipment. If you need additional rack rails to adjust the width, depth or height of your knock down Rack, you'll need our rack rails with dual 10-32 tapped legs. |
 |
Take me to the Universal Rack Rail Online Store! | |
|
"Z" Series Universal Rack Rail For
details click here |
Our "Z" Series Multi-Application Rack Rail is adaptable to a select type of rack installation calling for quick-release component/rail adapters and/or integral component glide systems requiring side installation as well as front installation. The "Z" series rails have standard EIA spaced (3 mounting holes per 1-3/4" EIA rack space) 3/8" (9.53mm) square holes. If so desired, cage nuts incorporating 10-32 tapped nuts can be used thus allowing installation by means of tapped rackmount screws & washers. If you need additional rack rails to adjust the width, depth or height of your knock down Rack, you'll need our rack rails with dual 10-32 tapped legs. |
 |
Take me to the Universal Rack Rail Online Store! | |
|
RFLEVFT4For details click
here |
Teflon padded leveling feet for Steel or Aluminum racks, 4 each, weight capacity 1800 pounds. Weight per set of 4 - 12 oz. Note: Already included in the price of every Rack Pre-Pack Kit and Master Pack. |
 |
$9.95 Wt. Each- <1 lbs. |
|
|
RFTRIM19For details click
here |
19" width trim panel (pair) to cover area of Rack above & below mounted components. Weight per pair is 2 oz. |
 |
$14.95 Wt. Each- <1 lbs. |
|
|
4HARISOMOUNTCHFor
details click here |
Elastomeric isolation mount (each). These isolation shock mounts are used in our F8 style shockmount rack cases yet have hundreds of other applications for providing shock isolation for our steel & aluminum racks when mounted in ground or air vehicles or where seismic activity is a concern. |
 (click photo) |
$9.97 Wt. Each- .10 lbs. |
|
|
RFSW10For details click
here |
Bag of 10 - 10-32, 5/8" long, phillips rack screws & washers |
 |
$1.95 Bag of 10 Wt. Each- <1 lb. |
|
|
RFSW100For details click
here |
Bag of 100 - 10-32, 5/8" long, phillips head rack screws & washers |
|
$11.95 Bag of 100 Wt. Each- <1 lb. |
|
|
RFSWDP10For details click
here |
Bag of 10 - 10-32, 7/8" long, phillips head, dogpoint tip rack screws & washers. Dogpoint screws with unthreaded screw tip, mount quickly and line up with rail threads more effectively helping to avoid accidentally thread stripping. |
 |
$2.95 Bag of 10 Wt. Each- <1 lb. |
|
|
RFSWDP100For details click
here |
Bag of 100 - 10-32, 7/8" long, phillips head, dogpoint tip rack screws & washers. Dogpoint screws with unthreaded screw tip, mount quickly and line up with rail threads more effectively helping to avoid accidentally thread stripping. |
|
$19.95 Bag of 100 Wt. Each- <1 lb. |
|
|
RFCN10For details click
here |
Bag of 10 - 6M (6mm), 5/8" long, philips head rack screws, cage nuts & cup washers. Cage Nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage Nuts snap easily into 3/8" square rack holes. A Cage Nut application does not require special tools or skills, eliminating the need for special operations. The nut floats within the spring-steel cage more than enough to offset normal hole misalignment. Weight per bag of 10 is 3 oz. |
 |
$3.95 Bag of 10 Wt. Ea. <1lb. |
|
|
RFCN50For details click
here |
Bag of 50 - 6M (6mm), 5/8" long, philips head rack screws, cage nuts & cup washers. Cage Nuts combine the advantages of a spring-steel captive nut cage fastener with the superior strength of a multi-threaded nut. Cage Nuts snap easily into 3/8" square rack holes. A Cage Nut application does not require special tools or skills, eliminating the need for special operations. The nut floats within the spring-steel cage more than enough to offset normal hole misalignment. Weight per bag of 50 is 1 lbs. |
|
$17.95 Bag of 50 Wt. Each- 1 lb. |
|
|
BN4For details click
here |
Bag of 4 - 1" long, 1/4-20 bolts & elastic stop nuts. The set of bolts & stop nuts is intended for positive fastening of two steel or aluminum frames of equal width & depth when stacking the two racks together. Both bolts & nuts are nickel plated. Weight per pack is 2 oz. |
 |
$1.95 Bag of 4 Wt. Each- 2 oz. |
|
|
RFTHREADPAC10For details click
here |
NEW - THREAD RESCUE! An indispensable addition to ever tool box. The perfect solution to stripped rack rail holes - simple, economical & EFFECTIVE! Bag of 10 each 10-32 x 7/8" dog point oval head screws, 10-32 barrel nuts & 10-32 keps nuts. For Adobe Acrobat
instructions, click
hereFor .jpg
instructions, click here |
 |
$3.95 Wt. Each- <1 lb. |
|
| RF1SPFor details click
here |
1 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 12 oz. |
 |
$6.95 Wt. Each- <1 lb. |
|
| RF2SPFor details click
here |
2 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 1.5 lbs. |
 |
$8.95 Wt. Each- 1.5 lbs. |
|
|
RF3SPFor details click
here |
3 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 2 lbs. |
 |
$11.95 Wt. Each- 2.0 lbs. |
|
|
RF4SPFor details click
here |
4 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 2.5 lbs. |
 |
$14.95 Wt. Each- 2.5 lbs. |
|
|
RF4SPFor details click
here |
4 space rack filler panel-black powder coated. Filler panels come in handy to fill excess rackmountable space in your rack when future component expansion is anticipated. Filler panels mount to either the front or rear of your rack and can be easily painted to color coordinate with other components. Weight is 2.5 lbs. |
|
$14.95 Wt. Each- 2.5 lbs. |
|
|
172 STEEL RACK Pre-Pack Kits |
 |
172 ALUMINUM RACK Pre-Pack Kits |
 |
20" LAN STATIONS |
 |
|
|
Tapped 10-32 Holes |
Square 3/8" Holes |
Tapped 10-32 Holes |
Aerospace Aluminum 1/2 the weight of steel !! |
20" Width |
||
 |
 |
 |
||||
|
CUSTOM STEEL RACKS Custom Sizes |
 |
CUSTOM ALUMINUM RACKS Custom Sizes |
 |
RACK OPTIONS & ACCESSORIES |
Rack Drawers |
 |
|
Rack
Shelves |
 |
|||||
|
Tapped 10-32 Holes |
Square 3/8" Holes |
Tapped 10-32 Holes |
7 Distinct Type of
Rack Rail- 10-32 Tapped & 3/8" Square Holes |
|||
|
|
|
|
Aerospace Aluminum 1/2 the weight of steel !! |
 |
||
| Designer Series | ||||||
|
36 PRE-PACKAGED RACKS |
 |
FRAMES & STANDS |
||||
