Home > Products > Rack Accessories

Rackmount Accessories

Star Case provides all parts and accessories related to rackmount and shockmount shipping cases. We have everything you need to build and replace all rackmount components including side panels and doors, handles and casters, drawers and rack shelves, as well as all rack screws, washers, fasteners, and all other rack mount accessories. All of our rackmount components are made from steel or aluminum and designed using state-of-the-art technology to ensure the highest quality rackmount parts and accessories. Our selection of lightweight rackmount accessories are designed to protect your most delicate and important equipment from damaging conditions including electricity, inclement weather, rough travel, and the natural elements of the daily environment. Star Case products are made in America with shipping available within 24 hours on most products. Give us a call to start designing your next rackmount kit today!

Accessories for All Racks
Rack Shelves
Part # Description Image Purchase
RFSHELF19

(details)

Cantilever design rack shelf 19" (17-1/2" useable) in width - 50 lbs. capacity. 4 each 10-32 x 5/8" steel mounting screws are included.
Click Image
$30.85
RFSHELF19V

(details)
Cantilever design "ventilated" rack shelf 19" (17-1/2" useable) in width - 50 lbs. capacity. 4 each 10-32 x 5/8" steel mounting screws are included. Ventilated Rack Shelf
Click Image
$35.85
RFSHELF17SL

(details)
This is a glide mounted sliding rack shelf or rack drawer if flipped 180 degrees. It firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. Weight capacity is 75 pounds. 8 each 10-32 x 5/8" steel mounting screws are included.
Click Image
$72.05
RFSHELF17SL3PK

(details)
Buy a 3-pack, RFSHELF17SL while supplies last and Save! Cost each only - $64.85 Ventilated Rack Shelves
Click Image
$194.54
RFSHELF17SLV

(details)
This is a glide mounted "ventilated" sliding rack shelf or rack drawer if flipped 180 degrees. It firmly attaches to both front nd rear rack rails and occupies only 1 rack unit of space. Weight capacity is 75 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Ventilated adjustable rack shelf
Click Image
$77.05
RFSHEL17SLV3PK

(details)
Buy a 3-pack, RFSHELF17SLV while supplies last and Save! Cost each only - $69.35
Click Image
$208.04
RFSHELF30SL

(details)
This shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32". Weight capacity is 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Adjustable rack shelf
Click Image
$102.95
RFSHELF30SL3PK

(details)

Buy a 3-pack, RFSHELF30SL, while supplies last and Save! Cost each only - $92.65
Click Image
$277.95
RFSHELF30SLV

(details)
This "ventilated" shelf firmly attaches to both front and rear rack rails and occupies only 1 rack units of space. Depth is adjustable from 20" to 32". Weight capacity is 150 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. Adjustable ventilated rack shelf
Click Image
$107.95
RFSHELF30SLV3PK

(details)
Buy a 3-pack, RFSHELF30SLV, while supplies last and Save! Cost each only - $97.16 3 Pack-Ventilated Adjustable Rack Shelves
Click Image
$291.47
RRSS20

(details)
New! Sliding Rack Rail Component Support System - 20" depth racks
Your components slide securely in and out of your rack. These rack accessories systems work well with virtually all EIA rack frames, cabinets and enclosures.
Rack Rail Support System
Click Image
$41.15
RRSS25

(details)
New! Sliding Rack Rail Component Support System - 25" depth racks
Your components slide securely in and out of your rack. These rack accessories systems work well with virtually all EIA rack frames, cabinets and enclosures.
Rack Rail Support System
Click Image
$47.33
RRSS30

(details)
New! Sliding Rack Rail Component Support System - 30" depth racks
Your components slide securely in and out of your rack. These rack accessories systems work well with virtually all EIA rack frames, cabinets and enclosures.
Rack Rail Support System
Click Image
$51.45




Steel Rack Drawers
Part # Description Image Purchase
RFSHELF17SL

(details)------
This is a glide mounted sliding rack shelf or rack drawer if flipped 180 degrees. It firmly attaches to both front and rear rack rails and occupies only 1 rack unit of space. Weight capacity is 75 pounds. 8 each 10-32 x 5/8" steel mounting screws are included. $72.05
RFDRAW2C

(details)
2 rack unit (3-1/2") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) STEEL rackmountable drawer drawer, keylock & closure latch included. Weight -14 lbs.



$87.63
RFDRAW3C

(details)
3 rack unit (5-1/4") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) STEEL rackmountable drawer drawer, keylock & closure latch included. Weight -16 lbs.


$97.93
RFDRAW4C

(details)
4 rack unit (7") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) STEEL rackmountable drawer drawer, keylock & closure latch included. Weight -18 lbs.


$108.23
RFDRAW6C

(details)
6 rack unit (10-1/2") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) STEEL rackmountable drawer drawer, keylock & closure latch included. Weight -22 lbs.



$159.73

RFDCLIPROD

(details)
The RFD6CLIPROD option, when used with our 6U (10-1/2") high rackmount drawer (RFDRAW6), provides a heavy-duty, highly functional hanging folder system. Once the CLIPS are attached to the drawer sides and the RODS are fitted into the clips, you'll be able to laterally suspend a stack of hanging folders. Even with vinyl hanging tabs attached, drawer opens & closes smoothly. $7.16
RFKEYBRD2

(details)
2 rack unit glide-mounted keyboard shelf with ambidextrous sliding mouse tray. $123.55
RFDRAW3

3 rack unit (5-1/4") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) STEEL rackmountable drawer drawer, keylock included. Weight -16 lbs.
NOTE: Quantities on this item are very limited. Once current inventory is depleted, this item as described will no longer be available.

$30.99

RFDRAW4
4 rack unit (7") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) STEEL rackmountable drawer drawer, keylock included. Weight -18 lbs.
NOTE: Quantities on this item are very limited. Once current inventory is depleted, this item as described will no longer be available
$34.99


Aluminum Rack Drawers (Star Case Exclusive!)
Part # Description Image Purchase
AFDRAW2C
AFDRAW2C000
(details)
2 rack unit (3-1/2") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) ALUMINUM rackmountable drawer drawer, keylock & closure latch included. Weight -8 lbs.


$133.75


AFDRAW3C

(details)
3 rack unit (5-1/4") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) ALUMINUM rackmountable drawer drawer, keylock & closure latch included. Weight -10 lbs.



$139.97
AFDRAW4C

(details)
4 rack unit (7") height, 19" width (16-1/8" useable width x 14-1/4" useable depth) ALUMINUM rackmountable drawer drawer, keylock & closure latch included. Weight -12 lbs.


$150.01





Precisely cut trim panels to cover open area at top and bottom of steel or aluminum racks. Mounted components fit flush to top and bottom trim panel.
Rack Filler & Blanking Panels
Part # Description Image Purchase
RF1SP

(details)
1U (1-3/4") steel rack filler panel-black powder coated. This rack accessory works well with virtually all EIA compliant rack frames, cabinets & enclosures. $6.30
RF2SP

(details)
2U (3-1/2") steel rack filler panel-black powder coated. This rack accessory works well with virtually all EIA compliant rack frames, cabinets & enclosures. $8.64
RF3SP

(details)
3U (5-1/4") steel rack filler panel-black powder coated. This rack accessory works well with virtually all EIA compliant rack frames, cabinets & enclosures. $9.62
RF4SP

(details)
4U (7") steel rack filler panel-black powder coated. This rack accessory works well with virtually all EIA compliant rack frames, cabinets & enclosures. $12.35


RFTRIM19

(details)
Precisely cut trim panels to cover open area at top and bottom of steel or aluminum Pro Series racks. Mounted components fit flush to top and bottom trim panels. $5.01

Rack Fasteners
Part # Description Image Purchase
RFSW10

(details)
Bag of 10 - 10-32, 5/8" long, phillips rack screws & plastic cup washers. These rack accessories work well with virtually all EIA rack frames, cabinets and enclosures.

$2.01
RFSW100

(details)
Bag of 100 - 10-32, 5/8" long, dogpoint tip phillips rack screws & plastic cup washers. These rack accessories work well with virtually all EIA rack frames, cabinets and enclosures. $12.31
RFSWDP10

(details)
Bag of 10 - 10-32, 7/8" long, phillips rack screws & plastic cup washers. Dogpoint screws with unthreaded screw tip mount quickly and line up with rail threads more effectively helping to avoid accidental thread stripping. $3.04
RFSWDP100

(details)
Bag of 100 - 10-32, 7/8" long, phillips rack screws & plastic cup washers. Dogpoint screws with unthreaded screw tip mount quickly and line up with rail threads more effectively helping to avoid accidental thread stripping. $20.55
RFCN10

(details)
Bag of 10 - 6M (6mm), 5/8" long, phillips head rack screws, cage nuts & cup washers. $4.07
RFCN50

(details)
v\ Bag of 50 - 6M (6mm), 5/8" long, phillips head rack screws, cage nuts & cup washers. $18.49
UBN4

(details)
Bag of 4 - 1" long, 1/4-20 bolts & elastic stop nuts. The set of bolts & stop nuts is intended for positive fastening of twso steel or aluminum rack frames of equal width & depth when stacking the two racks together. Both bolts & nuts are nickel plated. $2.01

RFTHREADPAC10

(details)
NEW - THREAD RESCUE!!
An indispensable addition to every tool box. The perfect solution to stripped rack rail holes - simple, economical & EFFECTIVE! Bag of 10 each 10-32 x 7/8" dog point screws, 10-32 barrel nuts & 10-32 keps nuts.
$4.07

Misc. Rack Accessories
Part # Description Image Purchase
RFPOWERSTRIP An 8-outlet powerstrip complete with on/off illuminated power switch with snap-on protective cover, extruded aluminum frame and 20A, 125VAC circuit breaker. Powerstrip mounts conveniently in any 19" EIA rack. Rack ears can be rotated 180 degrees so receptacles face inward or outward. $43.53

NEW! Star Case Exclusive - - Patent Pending Rackmount Curl Brackets & Link Strip Component Support System for horizontal and/or vertical component or drawer support



For Details - Click Image

RFCB

(details)
This set of curl brackets, 10-32 rack screws and keps nuts is the main fastening elements that permit our highly effective component support system to tightly attach the rear of your components to either the rear or top of your steel or aluminum rack.


$7.67
RFCBLK07

(details)
This set of 7" link strips is used to connect the back end of your component, drawer, etc. to the curl brackets fastened to the rear rack rails of your rack frame, enclosure or shipping case.


$7.83
RFCBLK19

(details)
This set of 19-1/4" link strips is used to connect the back end of your component, drawer, etc. to the curl brackets fastened to the rear rack rails of your rack frame, enclosure or shipping case.

$10.13
4HARCINTOOL

(details)
NEW!! A Cage Nut Tool that Really Works!
A Star Case exclusive - a cost-effective and highly effective tool for inserting cage nuts into 3/8" square hole rack rail. No more hit & miss techniques for installing cage nuts. Simply follow the easy instructions provided with the Cage Nut Tool for fast and efficient installation.
$15.99
4HARLOCKTSA

(details)
NEW!! TSA Approved Combination Padlock!
This lock is recognized by the TSA (Transportation Security Administration) and allows the TSA to open the lock should the need arise for a security search. It can then be re-locked by the TSA with no damage to the lock or your case. A high strength combination padlock for use on Star Cases or any other case or luggage item needing secure passage through TSA inspections.
$14.35
4HARISOMOUNT

(details)
Shock Isolation!
This Elastomeric isolation mount (each). These isolation shock mounts are used as an isolation barrier between rack frames and solid surfaces. They have hundreds of other applications for providing shock isolation for ground or air vehicles or where seismic activity is a concern.
$10.27
Professional Series Rack Accessories
Cover & Side Panels
RFCOVPAN20

20" depth panel (sold separately) to enclose top and/or bottom area of rack. The cover panel option adds both funtionality as well as added stability. Each cover panel is manufactured of high grade 12 gauge steel with a flat black powder coat.

$27.10
RFCOVPAN25
25" depth panel (sold separately) to enclose top and/or bottom area of rack. The cover panel option adds both funtionality as well as added stability. Each cover panel is manufactured of high grade 12 gauge steel with a flat black powder coat. $30.85
RFCOVPAN30
30" depth panel (sold separately) to enclose top and/or bottom area of rack. The cover panel option adds both funtionality as well as added stability. Each cover panel is manufactured of high grade 12 gauge steel with a flat black powder coat. $36.00
20" DEPTH SIDE PANELS
The sidepanel option is available for 20”, 25” or 30” depth racks of any height from 4U to 45U. Sidepanels are precision cut with specially routed
corners to fit
the sides of your Professional Series rack frame. Larger size sidepanels are supplied as a 2-part assembly for each side to minimize freight costs. Each 2-part side panel has an identical upper and lower section that attach to the
other with a double channel plastic extrusion.
From
$23.19

25" DEPTH SIDE PANELS
The sidepanel option is available for 20”, 25” or 30” depth racks of any height from 4U to 45U. Sidepanels are precision cut with specially routed
corners to fit
the sides of your Professional Series rack frame. Larger size sidepanels are supplied as a 2-part assembly for each side to minimize freight costs. Each 2-part side panel has an identical upper and lower section that attach to the
other with a double channel plastic extrusion.
From
$26.07

30" DEPTH SIDE PANELS
The sidepanel option is available for 20”, 25” or 30” depth racks of any height from 4U to 45U. Sidepanels are precision cut with specially routed
corners to fit
the sides of your Professional Series rack frame. Larger size sidepanels are supplied as a 2-part assembly for each side to minimize freight costs. Each 2-part side panel has an identical upper and lower section that attach to the
other with a double channel plastic extrusion.
From
$28.97





Casters, Braces, Handles, etc.
RFCASTERS
Set of 4, 3" diameter swivel & locking twin-wheel casters (400 lbs. capacity per set of 4) for standard duty applications. $30.85
RFCASTERSHD20
For 20" depth star rack frames: This option affords you the perfect solution for heavily loaded Star Rack Frames. When the loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. $153.47
RFCASTERSHD25
For 25" depth star rack frames: This option affords you the perfect solution for heavily loaded Star Rack Frames. When the loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. $163.77
RFCASTERSHD30
For 30" depth star rack frames: This option affords you the perfect solution for heavily loaded Star Rack Frames. When the loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. $174.07
RFBRACES
STEEL CROSS BRACES - For added security and stability of taller racks when overall weight of your rack is in the 500 lbs. area, we recommend the use of our cross braces kit.
$25.00
AFBRACES
ALUMINUM CROSS BRACES - For added security and stability of taller racks when overall weight of your rack is in the 500 lbs. area, we recommend the use of our cross braces kit. $32.50
RFHANDLES20
Pair of 2 each, 20" depth, side-mounted lifting handles and mounting hardware. $20.99
RFHANDLES25
Pair of 2 each, 25" depth, side-mounted lifting handles and mounting hardware. $21.49
RFHANDLES30
Pair of 2 each, 30" depth, side-mounted lifting handles and mounting hardware.

$21.99
RFTRIM19
Precisely cut trim panels to cover the open area at the top and bottom of steel or aluminum racks. Mounted components fit flush to top and bottom trim panel.


$5.10
RFLEVFT4
Teflon padded leveling feet for steel or aluminum racks, 4 each, weight capacity 800 lbs. Note: this item is already included in the price of every rack pre-pack kit and master pack.
$10.25
RFWALLHANGKIT
T A solution to easily wall hang your Star Case Pro Series rack frame. This kit can be used with any standard width Pro Series rack. Each kit comes with 4 each 2" steel lag bolts, 4 each 3/4" steel washers and 4 each 3" toggle bolts. For concrete or masonry wall hanging, specialized fasteners my be supplied by user.
$51.35
PSAD04-PSAD45 Available soon. For details and to purchase, contact us at 800-822-7827
For Optional key locking semi-transparent smoked acrylic rack doors mount to either front and/or rear of Professional Series racks. Rack doors are available in all sizes from 4U to 45U heights. Doors attach with lift-off type hinges to permit quick install and removal and open to 145 degrees. All doors are keyed alike.
From
$144.88

Designer Series Rack Accessories
Cover Panels & Side Panels
DSCOVPAN20HD 20" depth heavy-duty,high weight capacity cover panel (sold individually) to enclose top of Designer Series Rack. Each Cover Panel is manufactured of 3/4" black laminated plywood.
$61.49
DSCOVPAN24HD 24" depth heavy-duty,high weight capacity cover panel (sold individually) to enclose top of Designer Series Rack. Each Cover Panel is manufactured of 3/4" black laminated plywood.
$65.20
DSCOVPAN30HD 30" depth heavy-duty,high weight capacity cover panel (sold individually) to enclose top of Designer Series Rack. Each Cover Panel is manufactured of 3/4" black laminated plywood. $70.77
DSPXCOVPAN20 20" depth smoked acrylic cover panels (pair) to enclose top and/or bottom of Designer Series Racks. Each Cover Panel is manufactured of high grade 1/8" thick smoked acrylic.
$40.17
DSPXCOVPAN24 24" depth smoked acrylic cover panels (pair) to enclose top and/or bottom of Designer Series Racks. Each Cover Panel is manufactured of high grade 1/8" thick smoked acrylic. $45.32
DSPXCOVPAN30 30" depth smoked acrylic cover panels (pair) to enclose top and/or bottom of Designer Series Racks. Each Cover Panel is manufactured of high grade 1/8" thick smoked acrylic. $50.47
DSCOVPAN20 20" depth ABS plastic cover panels (pair) to enclose top and/or bottom of Designer Series Racks. Each Cover Panel is manufactured of high grade 1/8" thick ABS plastic. $35.01
DSCOVPAN24 24" depth ABS plastic cover panels (pair) to enclose top and/or bottom of Designer Series Racks. Each Cover Panel is manufactured of high grade 1/8" thick ABS plastic. $39.33
DSCOVPAN30 30" depth ABS plastic cover panels (pair) to enclose top and/or bottom of Designer Series Racks. Each Cover Panel is manufactured of high grade 1/8" thick ABS plastic. $45.81
DESIGNER
SERIES
RACK SMOKED
ACRYLIC
SIDE PANELS
20", 24" or 30" depth side panels (pair) to fit 4U - 48 Designer Series rack heights. Side panels thoroughly enclose both side of Designer Series racks. Each side panel is manufactured of high grade, 1/8" thick smoked acrylic.
Available soon. For details and to purchase, contact us at 800-822-7827
from
$25.73/pr.
DESIGNER
SERIES
RACK FLAT
BLACK ABS
SIDE PANELS
20", 24" or 30" depth side panels (pair) to fit 4U - 48U Designer Series rack heights. Side panels thoroughly enclose both side of Designer Series racks. Each side panel is manufactured of high grade, 1/8" thick ABS plastic.

Designer Series Side Panels from
$21.94/pr.

Casters & Rack Doors
RFCASTERS
Set of 4, 3" diameter swivel & locking twin-wheel casters (400 lbs. capacity per set of 4) for standard duty applications. $30.85
DSCASTERSHD20 For 20" depth star rack frames: This option affords you the perfect solution for heavily loaded Designer Series Rack Frames. When the loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. $153.47
DSCASTERSHD24 For 24" depth star rack frames: This option affords you the perfect solution for heavily loaded Designer Series Rack Frames. When the loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. $163.77
DSCASTERSHD30 For 30" depth star rack frames: This option affords you the perfect solution for heavily loaded Designer Series Rack Frames. When the loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your rack must roll. $174.07
Designer Series
rack doors now
available in 44 sizes
DSAD04-DSAD48
Available soon. For details and to purchase, contact us at 800-822-7827
For Optional key locking semi-transparent smoked acrylic rack doors mount to either front and/or rear of Designer Series racks. Rack doors are available in all sizes from 4U to 48U heights. Doors attach with lift-off type hinges to permit quick install and removal and open to 145 degrees. All doors are keyed alike.

from
$160.71