|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Wheels for Corner Mounted Recessed Casters (sold in pairs)
Product I.D.: 7CASREPWHEELBK
Wheel diameter: 2-3/4"
Wheel tread width: 7/8"
Product Material: Hard urethane rubber
Our corner mounted recessed caster assemblies incorporate a high strength cast steel zinc housing that screws or rivets into left & right corners of structure you intend rolling. This part is often used as a wheel replacement as included with our Corporate Case Cart option. Weight capacity per pair of our corner mount, recessed casters is recommended not to exceed 75 pounds.
|
Removable Caster Bracket for Star Case Standard Duty 4" Casters (sold individually)
Product I.D.: 7CASBRACKET
Outside Dimensions: 4" x 3-1/4" x 3/4"
Acceptable Caster Plate Size: 2-1/2"x 3-5/8" x 1/8"
Product Mateiral: Aluminum with spring steel retention clip
Product Material: Steel with protective zinc plated finish - hard rubber wheel
- removable caster bracket to facilitate fast and easy caster removal.
- optional on most Star Case ATA compliant case types able to use Star Case 4" casters.
- permits the ability to remove casters during transit as well as to reduce overall case height and increase payload height capacity in trucks, cargo bays & containers.
- casters are retained in the removable caster plate with a spring-steel retention clip. Pressure against the clip allows the caster to slide freely from the aluminum track.
- solid aluminum construction with spring-steel retention clip.
|
4" full swivel, standard duty caster (sold individually)
Product I.D.: 7CAS4STD
Wheel diameter: 4"
Wheel tread width: 1-1/4"
Product Material: Steel with protective zinc plated finish - hard rubber wheel
- 4" standard swivel caster
- weight rating of 220 pounds each or 880 pounds per set of 4
- hard rubber tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 4” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Removable Caster Bracket for Star Case
3-1/2" & 5" swivel casters (8 pack only)
Product I.D.: 7CASBRACKETCH08 Outside Dimensions:
4-3/4" x
4-5/8"
x 3/8" (wdh) Acceptable
Caster Plate Size:
4-1/8" x 3-1/8"x1/8" (wdh) Product Weight: 16 ounces each Product Material:
Steel with zinc protective plated finish * removable caster bracket to
facilitate fast and easy caster removal.
* optional on most Star Case
ATA compliant case types
able to use 3-1/2" & 5" casters.
* permits
the ability to remove casters during transit as well as to reduce
overall case
height and increase payload height capacity in trucks,
cargo bays & containers.
* casters are retained in the removable
caster plate with a spring-loaded pin. Pressure
against the pin
allows the caster to slide freely from the steel track.
* solid
steel construction with protective zinc plated surface
|
5" full swivel, heavy duty caster (sold individually)
Product I.D.: 7CAS5
Wheel diameter: 5"
Wheel tread width: 1"
Product Material: Steel with protective zinc plated finish - urethane wheel
- 5" heavy-duty swivel caster
- weight rating of 300 pounds each, 1200 lbs. for set of 4
- urethane tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 5” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
4" full swivel, standard duty swivel & locking caster (sold individually)
Product I.D.: 7CAS4LSTD
Wheel diameter: 4"
Wheel tread width: 1-1/4"
Product Material: Steel with protective zinc plated finish - hard rubber wheel
- 4" standard duty swivel & locking caster
- weight rating of 220 pounds each or 880 pounds per set of 4
- hard rubber tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 4” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3-1/8" wheel in cast zinc housing-exterior mount (sold individually)
Product I.D.: 7CASRECMETALZNCH
Wheel diameter: 3-1/8"
Wheel tread width: 7/8"
Product Material: Cast zinc alloy, natural silver finish, black, hard resin inline skate wheel
Our interior corner mounted caster assembly incorporates a high strength cast zinc alloy housing that screws or rivets into left & right corners of structure you intend rolling. This part is often used in conjunction with our product I.D. 4HARHANPULL3STG or 4HARHANDPULLEXT retractable tow handles as well as our 4HARRUBFT791CH heavy-duty rubber feet for leveling purposes. Weight capacity per pair of our corner mount, recessed casters is recommended not to exceed 75 pounds.
|
4" full swivel, medium duty swivel caster (sold individually)
Product I.D.: 7CAS4MD
Wheel diameter: 4"
Wheel tread width: 1-1/4"
Product Material: Steel with protective zinc plated finish - hard poly wheel
- 4" medium duty swivel caster
- weight rating of 300 pounds each or 1,200 pounds per set of 4
- hard poly tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 4” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
4" full swivel, medium duty swivel & locking caster (sold individually)
Product I.D.: 7CAS4LMD
Wheel diameter: 4"
Wheel tread width: 1-1/4"
Product Material: Steel with protective zinc plated finish - hard poly wheel
- 4" medium duty swivel & locking caster
- weight rating of 300 pounds each or 1,200 pounds per set of 4
- hard poly tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 4” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-3/4" wheel in cast zinc housing-exterior mount (sold individually)
Product I.D.: 7CAS4EXTMETALZN
Wheel diameter: 2-3/4"
Wheel tread width: 7/8"
Product Material: Cast zinc alloy, natural silver finish, black, hard resin inline skate wheel
Our exterior corner mounted caster assembly incorporates a high strength cast zincalloy housing that screws or rivets into left & right corners of structure you intend rolling. This part is often used in conjunction with our product I.D. 4HARHANPULL3STG or 4HARHANDPULLEXT retractable tow handles as well as our 4HARRUBFT791CH heavy-duty rubber feet for leveling purposes. Weight capacity per pair of our corner mount, recessed casters is recommended not to exceed 75 pounds.
|
Set of 4, 3" diameter swivel casters for occasional rack movement. Casters have a threaded stud which mates with a threaded hole in the metal corner connectors. Casters can be locked into non-rotating mode by means of a positive tooth-in-gear system. If you should decide later that you'd prefer to add casters on your Rack, this option can be easily added at that time. STATIC Weight capacity per set of 4 casters – 400 pounds. Weight per set of 4 casters is 1.8 lbs.
|
3" wheel in cast zinc housing-inset mount (sold individually)
Product I.D.: 7CASRECMETAL
Wheel diameter: 3"
Wheel tread width: 1-1/4"
Product Material: Cast zinc alloy, flat finish, black, hard rubber inline skate wheel
Our inset mounted recessed caster assembly incorporates a high strength cast zinc alloy housing that screws or rivets into area between corners of case you intend rolling. This part is often used in conjunction with our product I.D. 4HARHANPULLCH retractable tow handle as well as our 4HARUBFT791CH heavy-duty rubber feet for leveling purposes. Weight capacity per pair of our corner mount, recessed casters is recommended not to exceed 75 pounds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4" full swivel, super heavy-duty caster (sold individually)
Product I.D.: 7CAS4
Wheel diameter: 4"
Wheel tread width: 2"
Product Material: Steel with protective zinc plated finish - urethane wheel
- 4" super heavy-duty swivel caster
- easy maintenance greasy fitting
- weight rating of 660 pounds each, or 2,640 pounds per set of 4.
- urethane tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 4” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
4" full swivel & locking, super heavy-duty caster (sold individually)
Product I.D.: 7CAS4L
Wheel diameter: 4"
Wheel tread width: 2"
Product Material: Steel with protective zinc plated finish - urethane wheel
- 4" super heavy-duty swivel & locking caster
- easy maintenance greasy fitting
- weight rating of 660 pounds each, or 2,640 pounds per set of 4.
- urethane tire mounted to a composite wheel and attached to a ball bearing swivel mechanism by means of a ball-bearing encased - solid steel axle
- available on all Star Case types
- can be used as a repair part on most ATA-type shipping and custom cases or for general applications calling for a rugged 4” swivel caster
- fork assembly and mounting plate – non-corroding zinc plated steel
Note: Caster color may vary
|
4" heavy-duty casters and protective casterboard(s) (installed set)
Product I.D.: 7CASINSTALL
Wheel diameter: 4"
Casterboard(s) thickness: 3/4"
Wheel tread width: 1-1/4"
Product Material: Steel with protective zinc plated finish -hard rubber wheel
4" heavy-duty casters and protective casterboard(s) (installed) | -
-
-
- | 4 each 4" diameter heavy-duty swivel casters that bolt to 3/4" protective casterboard(s) fastened to bottom of case.
Hard rubber tire attached to a ball-bearing swivel mechanism wheel by means of a ball-bearing encased solid steel axle.
This option comes fully installed on either utility case or rackmount case you've ordered.
Fork assembly, brake, and mounting plate – non-corroding zinc plated steel - wheel is black. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your 20" depth Pro Series rack must roll. Simply assemble your 20" depth steel or aluminum Pro Series Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board.
|
This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your 25" depth Pro Series rack must roll. Simply assemble your 25" depth steel or aluminum Pro Series Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board.
|
This option affords you the perfect solution for heavily loaded Star Frames. When your loaded frame is to exceed 400 lbs., we recommend this heavy-duty option when your 30" depth Pro Series rack must roll. Simply assemble your 30" depth steel or aluminum Pro Series Frame and place directly over 5/16" threaded T-nuts in each corner of the caster dolly board and fasten the supplied Philips head 5/16" screws to secure your frame to the rolling dolly board.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Caster plate and wheel kit for 3R Series cases that do not come equipped with built-in pull handle and wheels. See link below for a step by step installation guide.
|
NOTE: THIS PRODUCT DROP SHIPS FROM OUR WAREHOUSE IN CALIFORNIA. IF YOUR SHIPPING DESTINATION IS WITHIN THE STATE OF CALIFORNIA, A 9% SALES TAX MUST BE CHARGED. PLEASE CALL US AT 800-822-7827 TO PLACE YOUR ORDER.
|
3R Series Caster Kit Instalation Guide
|
PLEASE NOTE: This item must ship by common carrier truck line. You will be contacted by email with an estimated freight quote prior to shipment.
Our line-up of Quick Ship stock shockmount rack cases is extensive. All ATA grade rack cases come standard with one each hasp locking, spring-loaded, recessed twist catches mounted on the front & rear removable lids of the case. Standard rack rail is steel, 10-32 tapped, mounted both front & rear. This will create the best possible fit for your display within your Star Case.
For a broad selection of shockmount & non-shockmount racks, click here.
Model #: SCM181214
Star Case Rack Style: F4 Shockmount
Star Case Construction Type: ATA Star 3/8"
Rackable Width: 18-3/8" hole center-to-center, 10-32 tapped rack rails
Overall Outside Width: 26"
Rackable Depth: 24" rail-to-rail
Overall Outside Depth (including lids): 34"
Rackable Height: 12U (21")
Overall Outside Height: 33" (including caster elevation)
Options Included: Rear 10-32 tapped rack rails & 4" swivel casters
Product Weight: 137 Pounds
Popular accessories & related items~~~
|
|
|
